TR|MMER/EDGER iNSTRUCTiON CATALOG NUMBERS GH900, GH912 MANUAL
0 0
Replacement: Remplacement Repuestos: X Spool (AF-100) Cap (RC-100) : Bobine (AF-100) Capuchon (RC-100) Carrete (AF-100) Tapa (RC-100) ,/ SAFETY GUIDELINE - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. ._DANG E R: Indicates an imminently hazardous situation which, if not avoided, will result n death or serious injury.
zhCAUTION: Failure to comply with the recommendations outlined in the key information section wilt void warranty. z_WARNING: Some dust created by this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
• DON'T ABUSECORD - Nevercarrytrimmer bycordoryankittodisconnect from receptacle. Keepcordfromheat,oil,andsharpedges. REPLACEMENT PARTS - Whenservicing useonlyidentical replacement parts. • MAINTAIN TRIMMERS WITHCARE- Follow instructions inmaintenance section. Keep handles dry,cleanandfreefromoilandgrease. • CHECK DAMAGED PARTS - Before furtheruseofthetrimmer, a guardorotherpart thatisdamaged should becarefully checked todetermine thatitwilloperate properly and perform itsintended function.
FUNCTIONAL DESCRIPTION 1. On/Off Trigger Switch 2. Cord Retainer 3. Power Cord Plug ASSEMBLY (FIGURE A) 4. Auxiliary Handle 5. Collar 6. Motor Housing 7. Edge Guide Wheel 8. Guard 9. Spool AND ADJUSTMENT _WARNING: UNPLUG THE TRIMMER BEFORE ATTEMPTING TO ATTACH THE GUARD, EDGE GUIDE OR HANDLE. NEVER OPERATE TOOL WITHOUT GUARD FIRMLY iN PLACE. THE GUARD MUST ALWAYS BE ON THE TOOL TO PROTECT THE USER. ATTACHING THE GUARD z_WARNING: NEVER OPERATE TRIMMER WITHOUT GUARD FIRMLY IN PLACE.
OPERATING iNSTRUCTiONS zLWARNING: Always use proper eye protection that conforms to ANSI Z87.1 (CAN/CSA Z94.3) while operating this power trimmer. zhWARNING: Disconnect the plug from the power source before making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the trimmer accidentally. z_CAUTION: Before you begin trimming, only use the appropriate type of cutting line.
REPLACEMENT ACCESSORIES zLCAUTION: Before you begin trimming, only use the appropriate type of cutting line. Use Black & Decker replacement spool Model No. AF-100, and replacement cap RC-100. Reload nylon line (either bulk or prewound replacement spool) as shown in this manual. • USE ONLY .065 inch (1.65 mm) DIAMETER ROUND NYLON LINE. Do not use serrated or heavier gauge line, as they will overload the motor and cause overheating. This line is available at your local dealer or authorized service center.
4.Thelinecutterontheedgeoftheguardcandullovertime.Itis recommended you periodically touch-up thesharpness ofthebladewitha file. IMPORTANT: Toassure product SAFETY andRELIABILITY, repairs, maintenance and adjustment should beperformed byauthorized service centers orotherqualified service organizations, alwaysusingidentical replacement parts. TROUBLESHOOTING TRIMMER RUNS SLOWLY • Unplug the trimmer. • Check that the spool housing can rotate freely. Carefully clean it if necessary.
FULL TWO=YEAR HOME USE WARRANTY Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repairedat no charge in either of two ways. The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer).
Form # 90602174 Printed in China Catalog Number GH900, GH912 August 2013 32
