User's Manual
CHAPTER 5: Configuration
51
5.4.3. Port Access
The Port Access parameter is used to grant or deny access to the Outlet Managed
PDU’s RJ45 Setup Port. Normally, the Setup port is used for connection to a local
control device or an external modem.
The command access level will also determine which ports the account will be
allowed to access, as summarized below:
• Administrator and SuperUser: Accounts with Administrator or SuperUser
level command access are always allowed to connect to the Setup Port. Port
access cannot be disabled for Administrator and SuperUser level accounts.
• User: User level accounts are only allowed to connect to the Setup Port when
port access has been specically enabled for the account.
• ViewOnly: Accounts with ViewOnly access are not allowed to create
connections to the Setup Port.