User Manual

www.BISSELL.com

Cleaning the Hose and Foot

Locate the stretch hose where it

connects to the hose elbow on the

back of the vacuum. Look to see if

there is any debris in the hose and

hose elbow. Clean as necessary.

Locate the clear foot hose under the

hose holder. Remove the two screws

and clear clogs and debris in the hose.

Use a long narrow object such as a

broomstick to clean the hose. Replace

two screws and re-attach stretch

hose by sliding over inlet and rotating

upwards towards the lock position.

WARNING

To reduce the risk of electric shock, turn power switch OFF and disconnect plug from

electrical outlet before performing maintenance or troubleshooting checks.

NOTE: If the debris cannot be reached through the hose, then follow the

instructions for cleaning the air passageway in “Cleaning the Brush Roll” section.

Parts & Supplies

For Parts and Supplies, go to www.BISSELL.com and enter

your model number in the search ﬁeld.