POWERFORCE® COMPACT ___________ USER GUIDE 2112 SERIES More of a video person? Look for this icon and go online for an instructional how-to video at www.BISSELL.
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM. Always connect to a polarized outlet (one slot is wider than the other). Unplug from outlet when not in use and before conducting maintenance. When using an electrical appliance, basic precautions should be observed, including the following: WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: » Always connect to a polarized outlet (one slot is wider than the other).
Thanks for buying a BISSELL vacuum! We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your vacuum works as well as it does today for years to come, so this guide has tips on using (page 11), maintaining (pages 14-17), and if there is a problem, troubleshooting (page 18). In just a few simple assembly steps, you’ll be ready to vacuum.
Product View 1 10 2 3 11 4 12 5 13 6 14 15 7 16 8 9 17 20 1 Handle 2 Handle/ High Reach Extension Wand 3 Crevice Tool 4 Tank Release Button 5 Carrying Handle 6 Accessory Holder 7 Dirt Container 8 Dirt Container Empty Button 9 Handle Recline Pedal 10 Cord Hook 4 www.BISSELL.
Assembly WARNING Do not plug in your vacuum until you are familiar with all instructions and operating procedures. 1 2 Position the handle so the lower tab is facing the back of the vacuum. Insert the handle into the base and push until you hear it lock into place. Wrap the power cord around Upper and Lower Cord Wraps. 3 Attach tools by inserting them onto the on-unit tool holders. Crevice Tool Dusting Brush www.BISSELL.
Using Your Cleaner WARNING Before using your vacuum, make sure that the dirt container is in locked position and that all filters, both pre and post-filters are in place. DO NOT operate your vacuum without these filters. 1 Twist the Upper Quick Release™ Cord Wrap down to quickly remove cord. 4 2 Connect power cord plug to a polarized outlet. Press the handle recline pedal with your foot to place your vacuum in one of three positions: 3 Step on the red power switch on the back to turn the unit ON.
Above Floor Cleaning 2 1 Raise handle to upright position. Grasp hose and pull up to remove from hose holder. 4 3 For extended reach, remove the extension wand by pressing the extension wand release lever and pulling the handle out of the body. Connect the hose to the extension wand by inserting into the open end of the extension wand and twisting to lock. 6 5 Attach desired tool by firmly pushing onto end of vacuum hose or extension wand.
Power Cord Storage WARNING To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. When you have finished using your vacuum, store the power cord on the cord wraps. Loop power cord around cord wraps on back of cleaner, making certain the Upper Quick Release cord wrap is pointed up towards the handle and the Lower Quick Release cord wrap is pointed down towards the floor.
Cleaning the Dirt Container WARNING To reduce the risk of electrical shock, turn power switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. 1 Remove Dirt Container by pushing the Dirt Container Release Button on top of the tank handle. 2 Open dirt container lid by lifting the release latch. 3 4 Remove primary separator by lifting out of the dirt container. Container and separator can be washed with handwarm water.
Cleaning the Filter WARNING To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. WARNING Do not operate vacuum with damp or wet filters, as well as without filters or the Dirt Container in place. Allow components to dry before reassembling the Dirt Container. 1 Remove Dirt Container by pushing the Dirt Container Release Button on top of the tank handle. 3 Grasp the filter and pull to remove.
Cleaning the Brush Roll WARNING To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. 1 Place vacuum upside down with brush roll facing upwards. Remove 5 screws with a Phillips screwdriver. 3 2 Lift off brush cover and grasp floor brush at both ends to lift out. Clean debris from brush roll, motor pulley, and drive belt. If brush roll is worn, replace as needed.
Replacing Drive Belt WARNING To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. 1 Place vacuum upside down with brush roll facing upwards. Remove 5 screws with a Phillips screwdriver. 3 2 Lift off brush cover and grasp floor brush at both ends to lift out. Check drive belt carefully for wear, cuts and stressed areas. If the drive belt appears worn, replace as needed.
Cleaning the Hose and Foot WARNING To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. 2 1 Locate the stretch hose where it connects to the hose elbow on the back of the vacuum. Look to see if there is any debris in the hose and hose elbow. Clean as necessary. Locate the clear foot hose under the hose holder. Remove the two screws and clear clogs and debris in the hose.
Troubleshooting WARNING To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone, or regular mail as described below.
Register your product today! Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: BISSELL Rewards Points Automatically earn points for discounts and free shipping on future purchases. Faster Service Supplying your information now saves you time should you need to contact us with questions regarding your product. Product Support Reminders and Alerts We’ll contact you with any important product maintenance reminders and alerts.
