Installation Instructions

LOOP (1)
TUBE (2)
CAP (3)
COVER (4)
TUBE (5)
CAP (6)
TUBE (7)
TUBE (10)
COVER (8)
CAP (9)
CAP (11)
CAP (13)
CAP (14)
TUBE (12)
STEM WITH HEX NUT (15)
COUPLING (16)
TUBE (17)
SOCKET (18)
INSTALLATION INSTRUCTIONS
1.Carefully remove the fixture out of the carton, and check that all parts are included referring to the
above illustration. Make sure not to misplace any parts that are needed for the installation;
2.Install the stem with hex nut (15) into coupling (16),the cap (14),cap(13),tube (12),cap (11),tube
(10),cap (9),cover (8),tube (7),cap(6),tube (5),cover (4),cap (3),tube (2) and loop (1) onto stem with
hex nut (15),then secure them with loop (1).
3.Install the tube (17) onto socket (18)
4.Fixture is ready for lamping and installation.