Owner Manual

ManualsBrandsBirch Lane ManualsCeiling LightsRondo 1 - Light Single Jar Pendant

Table Of Contents

USE AND CARE GUIDE

1 LIGHT PENDANT-CHAIN HANG-150 WATT

Above image represents many pendants,

your pendant may vary in style.

THANK YOU

We appreciate the trust and confidence you have placed through the purchase of this pendant.

We strive to continually create quality products designed to enhance your home.

Thank you for choosing us!

Summary of content (7 pages)

PAGE 1
USE AND CARE GUIDE 1 LIGHT PENDANT-CHAIN HANG-150 WATT Above image represents many pendants, your pendant may vary in style. THANK YOU We appreciate the trust and confidence you have placed through the purchase of this pendant. We strive to continually create quality products designed to enhance your home.
PAGE 2
Table of Contents Safety Information ....................................................................................................................................... 2 Warranty ...................................................................................................................................................... 2 Pre-Installation ............................................................................................................................................
PAGE 3
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase. NOTE: This pendant requires the use of one 120V, 60HZ, 150-Watt max, medium-base type A bulb (not included). Do not exceed the recommended wattage.
PAGE 4
Pre-Installation (continued) PACKAGE CONTENTS A B Part Description Quantity A Chain loop 1 B Fixture body 1
PAGE 5
Assembly instructions 1. Assemble the fixture body □ Carefully unpack the fixture, lay out all parts on clean surface. □ Screw chain loop (A) to top of the fixture body (B). 2 Preparing the light fixture to hang □ Attach the quick link (KK) to one end link of chain (JJ) and attach the quick link (KK) to the chain loop (A). □ Remove chain links from the chain (JJ) in order to achieve the desired length for hanging the fixture .
PAGE 6
Installation instructions 1 2 Installing the cross bar CAUTION: Ensure the power is off at the main fuse box prior to beginning installation. □ Turn off the switch at the wall. □ Turn the power off at the main fuse box. □ Install the cross bar (BB) with nipple ( FF), lock nut (DD) to the outlet box using two outlet box screws (CC). □ Unscrew the screw collar nut (II) from the screw collar loop (HH). □ Slide the screw collar nut (II) and then the canopy (GG) onto the end of the chain (JJ).
PAGE 7
Installation instructions (continued) 3 Hanging the light fixture □ Push all excess wires into the outlet box. HH GG □ Raise the canopy (GG) to the ceiling and secure in place by screwing the screw collar nut (II) onto the screw collar loop (HH). 4 II Installing the bulbs □ Prior to installing the bulb, inspect socket for silica packet. If packet is present, then remove and throw away. Do not expose it to children or pets. □ Install a 120V, 60HZ, 150-watt max.