User's Manual
Table Of Contents
- 1. Safety Instructions
- 2. Getting Started
- 2.1 Baby unit power supply
- 2.2 Parent unit battery installation and power supply
- 2.3 Belt clip/stand on parent unit
- 3. Using Your Digital Video Baby Monitor
- 3.1 Power on or off the baby unit
- 3.2 Power on or off the parent unit
- 3.3 Turn on or off the parent unit screen
- 3.4 Adjust speaker volume of the parent unit
- 3.5 Adjust LCD brightness of the parent unit
- 3.6 Adjust sound sensitivity of the baby unit
- 3.7 Turn sound activation on or off
- 3.8 Set temperature unit
- 3.9 Select camera
- 3.10 Zoom
- 3.11 Pairing and replacing baby unit(s)
- 3.12 Talk to the baby unit
- 3.13 Reset settings to default
- 4. Disposal of the Device (Environment)
- 5. Cleaning
- 6. Troubleshooting
- 7. General Information
- 8. Technical Specifications
Overview of the Baby Unit
1
2
3
4
5
6
7
8
9
10
Important guidelines for installing your digital video baby monitor
• To use your baby unit and parent unit together, you must be able to establish
a radio link between them, and the range will be affected by environmental
conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic
door or reinforced concrete, between the baby unit and parent unit may
block the radio signal.
• The signal strength may also be reduced by other solid structures, like walls,
or by radio or electrical equipment, such as TVs, computers, cordless or
mobile phones, fluorescent lights or dimmer switches.
• If the signal is poor, try moving the parent unit and/or the baby unit to
different positions in the rooms.
1. Camera lens
2. Infrared lights
4 x infra-red LEDs for night vision
illumination.
3. Power/Link indicator
On steadily when the baby unit is
powered on and linked to the parent
unit.
Flashes when the baby unit is not
linked to a parent unit; or the pairing
process is in progress; or the parent
unit is not viewing this baby unit.
4. Microphone
5. Control key panel
PAIR
Press and hold to pair with the parent
unit.
Power ON/OFF button
Press and hold to power the baby unit
on or off.
6. Stand
Tilt to adjust camera angle.
7. Power jack
8. Base
9. Speaker
10. Temperature sensor