User's Manual
Table Of Contents
- 1. Safety Instructions
- 2. Getting Started
- 2.1 Baby unit power supply
- 2.2 Parent unit battery installation and power supply
- 2.3 Belt clip/stand on parent unit
- 3. Using Your Digital Video Baby Monitor
- 3.1 Power on or off the baby unit
- 3.2 Power on or off the parent unit
- 3.3 Turn on or off the parent unit screen
- 3.4 Adjust speaker volume of the parent unit
- 3.5 Adjust LCD brightness of the parent unit
- 3.6 Adjust sound sensitivity of the baby unit
- 3.7 Turn sound activation on or off
- 3.8 Set temperature unit
- 3.9 Select camera
- 3.10 Zoom
- 3.11 Pairing and replacing baby unit(s)
- 3.12 Talk to the baby unit
- 3.13 Reset settings to default
- 4. Disposal of the Device (Environment)
- 5. Cleaning
- 6. Troubleshooting
- 7. General Information
- 8. Technical Specifications
18 Cleaning
5. Cleaning
Clean your Digital Video Baby Monitor with a slightly damp cloth or with an anti-
static cloth. Never use cleaning agents or abrasive solvents.
Cleaning and care
• Do not clean any part of the Digital Video Baby Monitor with thinners or other
solvents and chemicals - this may cause permanent damage to the product
which is not covered by the warranty.
• Keep your Digital Video Baby Monitor away from hot, humid areas or strong
sunlight, and do not let it get wet.
• Every effort has been made to ensure high standards of reliability of your
Digital Video Baby Monitor. However, if something does go wrong, please
do not try to repair it yourself - contact Customer Service for assistance.
IMPORTANT
Always power off and disconnect the power adapter before cleaning your
digital video baby monitor.