User's Manual

14 MBP41 Parent Unit Menu Options
4.5 Camera Control
4.5.1 Add (pair) a camera
1. Press the M button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until C is highlighted,
and the
del/add/view/scan menu will pop up.
3. Press the
+ UP button or - DOWN button to select ADD , and press
the OK button to confirm.
4.
CAM 1 / CAM 2 / CAM 3 / CAM 4 will pop up, press the + UP button or -
DOWN button to select the desired CAM, and press the OK button
to start searching for a camera unit. The green audio level LED will
flash rapidly while searching.
5. Press and hold the PAIR button underneath the baby unit until the
parent unit finds the camera, beeps and the picture from the camera
appears.
NOTE
A camera can only be registered to one parent unit at any one time.
4.5.2 View a camera
1. Press the M button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until C is highlighted
and the
del/add/view/scan menu pops up.
3. Press the
+ UP button or - DOWN button to select VIEW , and press
the OK button to confirm.
4.
CAM 1 / CAM 2 / CAM 3 / CAM 4 will pop up, press the + UP button or -
DOWN button to select desired CAM, and press the OK button to
view the picture from that camera.
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press OK repeatedly to select
CAM 1 , CAM 2 , CAM 3 , CAM 4 , SCAN .