User's Manual

Help 21
ENGLISH
Interference
Noise interference on your Parent Unit
• Your Baby and Parent Units may be too close. Move them farther apart.
• Make sure there is at least 3 to 4.5 feet (1 to 1.5 meters) between the
2 units to avoid audio feedback.
• lf the Baby Unit is too far away it may be out of range, try moving the Baby
Unit closer to the Parent Unit.
• Make sure the Baby and Parent Units are not near other electrical equipment,
such as a television, computer or cordless/mobile telephone.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi
®
routers),
Bluetooth
®
systems, or microwave ovens, may cause interference with this
product, so keep the Baby Monitor away at least 3 to 4.5 feet (1 to 1.5 meters)
from these types of products, or turn them off if they appear to be causing
interference.
• If the signal is weak, try moving the Parent and/or Baby Unit to different
positions in the rooms.
Reasons of Measurement Error
• Dirty probe tip
Please refer to the cleaning process in the manual to make sure the cleanness
of probe tip.
• Unstable human status, such as: hot or cold baths, physical exercise,
smoking and drinking hot or cold drinks ... etc.
Please avoid exercise, bathing for 30mins, and keep the forehead clean & dry
before measurement.
• Unstable environment, such as: the vent of air conditioning or fan.
Make sure the thermometer has been at room temperature for 15 minutes
before use..
• Wrong measurement area
Users should measure the correct position as Fig. 1 shown on page 13.
• Wrong measurement way
When scanning, the probe should face the Middle of Forehead area & the
measurement distance should be as close as possible.