User's Manual

38 Using your Answering Machine
9.8 Remote access
Remote access allows you to operate your answer machine and listen to your messages by
calling your IT6 from another phone.
The default setting is Activated .
1. Call your IT6. When you hear your outgoing message, press #.
2. Enter your 4 digit PIN. The default code is 0000.
- You hear a conrmation beep.
NOTE
Change this code for increased security, see “PIN” on page 33.
3. After entering your PIN as stated above, use the keypad to operate your IT6 answer
machine:
Play messages 2
Play previous message 1
Play next message 3
Delete message playing 6
Switch answer machine on 7
Stop playback 8
Switch answer machine o 9
9.8.1 Remote access on/o and change remote PIN
1. Press M, scroll u or d to Answ Machine and press M.
2. Scroll d to Answ Setting and press M.
3. Scroll d to Remote Acc . and press M.
4. Scroll u or d to select Activated , Deactivated or Change PIN .
5. Press m to conrm.
If you choose Change PIN enter the old PIN and press m.
6. Enter the new PIN and press m.
7. Re-enter the new PIN.
8. Press m to conrm.
9. Press e to return to standby.
9.9 Call screening
Use your handset or base speaker to hear a caller leaving a message. You can then choose
to ignore the caller or pick up the call.
The default settings are:
• Handset call screening: On
• Base call screening: On