User's Manual
Table Of Contents
- Contents
- Read these notes first 4
- Installation and set-up 5
- Before you start 8
- Switching on and off 9
- Your handset’s name 10
- To set the time and date 11
- Ringer volume and melody 12
- Making and answering calls 14
- The Phone Book (memory dialling) 17
- Caller Display 20
- Registering new handsets 27
- Answering machine
- Outgoing messages 32
- Switching on and off 35
- Recording a memo 36
- Playing your messages 37
- Answering machine settings 40
- Remote operation 44
- Handset settings 48
- Base unit settings 54
- Troubleshooting 61
Deregistering
handsets
For details of the DEREGISTER option, see page .
Base unit PIN The default PIN (personal identity number, or security
code) for the base unit is 0000. If you want to protect
your base unit’s settings, you can change the PIN to any
four-digit number you’ll easily remember. Once you’ve
changed it, you’ll be asked for it every time you go into
the
BASE SETTING menu.
To change the PIN:
1 Select the CHANGE PIN option by pressing
the PHONE/OK button
è
The display shows ENTER OLD PIN
2 Key in your existing PIN (default 0000) then
press the PHONE/OK button
è The display shows ENTER NEW PIN
3 Key in your chosen new PIN then press the
PHONE/OK button
è
The display shows CONFIRM NEW PIN
4 Key in your new PIN again then press the
PHONE/OK button
è
The display goes back to CHANGE PIN .and
If the PINs you key in at steps 2 and 3 don’t
match, you’ll hear an error tone, and you’ll
need to try again from the beginning.
If you want to turn PIN protection off, follow the steps
above to change the PIN back to 0000. Then you won’t
be asked for it when you change the base unit’s settings,
although you’ll still need it when you register a new
handset.
Base unit settings
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:05
Color profile: Generic CMYK printer profile
Composite Default screen
54
60
then press and hold HANG UP button to return
to standby mode.