User's Manual
Table Of Contents
- Contents
- Read these notes first 4
- Installation and set-up 5
- Before you start 8
- Switching on and off 9
- Your handset’s name 10
- To set the time and date 11
- Ringer volume and melody 12
- Making and answering calls 14
- The Phone Book (memory dialling) 17
- Caller Display 20
- Registering new handsets 27
- Answering machine
- Outgoing messages 32
- Switching on and off 35
- Recording a memo 36
- Playing your messages 37
- Answering machine settings 40
- Remote operation 44
- Handset settings 48
- Base unit settings 54
- Troubleshooting 61
Ringer volume
and melody
These are set using the ACOUSTIC SETTING option. See
page 13 for details.
Time & day See page 11for details.
Returning to
default
settings
The default settings for the base unit are:
■
Ringer volume level — 2
■
Ringer melody — 3
■
Time and day — 00:00 SUN
■
Dialling mode — TONE
■
— 00MS
■
Base unit PIN — 0000
■
Call Barring — OFF
■
911 and 112
To return all base unit settings to their defaults:
1 Select the DEFAULT SETTING option by
pressing the PHONE/OK button
è
The display shows CONFIRM DEFAULT
SETTING?
2 Press the PHONE/OK button to confirm, or
the HANG UP button to cancel
è
The display shows DEFAULT SETTING DONE
Dialling type
and recall
signal
The next option in the Base Setting menu is
LINE SET
TONE - 00MS
. This is for setting the dialling type and
the recall (flash) signal length, and you probably won’t
ever need this option.
You should always leave the dialling type at its
default setting —
TONE. You should not need to change
the recall signal setting unless you’re having problems
using your iDECT X1i on a PBX. Refer to page 66 for
more information.
Base unit settings
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:05
Color profile: Generic CMYK printer profile
Composite Default screen
5
Flash time 6
SOS numbers —
Total time —
ONEN
■
6
3