User's Manual

Getting Started 19
ENGLISH
two fingers underneath it. It should not be able to rotate around the neck.
If necessary, trim some of your dog’s hair where the Pet Collar Unit makes
contact with the skin to allow for consistent performance.
2.9 Trim Away Excess Strap Length
After you are satisfied with the fit of the Pet Collar Unit, you may want to trim
away some of the excess nylon strap.
1. Mark the desired strap length with a pen. However, you may want to allow
for growth especially when your dog is young or may grow a thicker winter
coat.
2. Remove the Pet Collar Unit from your dog and trim away excess strap
length.
3. To seal the end of the strap, hold it about 1/4 inch away from a candle flame
or lighter until the edge melts away.
PLEASE USE CAUTION.
2.10 Change Collar Contacts on the Pet Collar Unit
IMPORTANT
Power off the Pet Collar Unit before touching the Collar Contacts.
Make sure that the Collar Contacts are securely fastened. Do not over
tighten.
Included with your Wireless Fence Pet Training System are Collar Contacts in
three different lengths (short, medium and long) that deliver static correction to
your dog.
Choose the appropriate length for your dog’s hair coat. If your dog has dense
coats or undercoats, use one of the longer Collar Contacts included with your