User's Manual

Power LED indicator Illuminates when the Bluetooth Stereo Headset is powered on.

7. Charger Jack Plug in the USB cable for the power recharge.

8. Power On/Off Press this button to power on/off the device.

Pow er Recharge a ble

1. Plug the charger into your headset.

2. Plug the other end of the charger into an electrical outlet.

While charging, the headset indicator turns on and remains on until charging is complete.

The headset will not function while charging.

3. When charging is complete (indicators off), remove the charger from the electrical outlet,

and detach the charger cord from the headset.

Pairing w it h Bluetooth device

Before using your headset for the first time, you must pair it with a Bluetooth enabled

device prior to usage. The “Pairing” process creates a unique wireless link between two

devices. Once paired the communications between the paired devices does not need any

further authentication or authorization.

Please follow the instruction below to pair the headset with a Bluetooth enabled device:

1. Follow the operating instructions that came with your Bluetooth device to initiate the

pairing process.

2. Press “Stop” key and power-ON at the same time to enter pairing mode.

*Power-On status: initiate connection with last paired hands-free devices (HSP/HFP),