Haiku Owner's Manual

6
UNIVERSAL MOUNT INSTALLATION
For Low Profile Mount installation, see page 24.
Install fan stabilizer in covered outdoor locations on flat ceilings only.
An EMI filter (not shown) is included for certain regions and fan
diameters. If the EMI filter is included, install it with your fan.
The lower cover is shipped attached to the motor unit to protect the
fan’s internal electronics during installation.
Mounting Bracket
Fan Stabilizer,
M6 x 70 mm Bolt,
M6 Nut
(Included only with
damp-rated fans.)
4 mm Screw, Wedge,
Mounting Ball
Canopy
(4) M4 x 6 mm Screws
6 mm Steel Pin
Downrod
Wiring Cover
M6 x 32 mm Bolt
M6 Nut
(3) Airfoils
Uplight
(Optional, indoor fans only)
Downlight
(Optional)
Motor Unit
(6) Grommets
Lower Cover
(6) M5 Screws
OR
Wire Connectors
Wiring and Safety Cable