Haiku Owner's Manual

3
BEFORE YOU START
☑ Check Ceiling Slope (Universal Mount)
Consult the table below to make sure you have the appropriate downrod length
for your ceiling slope. Universal Mount fans can be installed on flat or sloped
ceilings with an angle no greater than 33° (approximately 8:12 roof pitch). For
minimum clearance guidelines, consult the Important Safety Instructions booklet
included with this installation guide.
Ceiling
Height
Fan
Diameter
Downrod
Length*
Maximum Ceiling
Slope (Indoor Only)**
9–10 ft
(2.7–3 m)
52 in. (1.3 m)
7 in. (178 mm) Flat
12 in. (305 mm) 12°
60 in. (1.5 m)
7 in. (178 mm) Flat
12 in. (305 mm) 10°
84 in. (2.1 m) 12 in. (305 mm) Flat
10–11 ft
(3–3.4 m)
52 in. (1.3 m)
20 in. (508 mm)
26°
60 in. (1.5 m) 22°
84 in. (2.1 m) 16°
11–13 ft
(3.4–4 m)
52 in. (1.3 m)
32 in. (813 mm)
33°
60 in. (1.5 m) 33°
84 in. (2.1 m) 29°
13–14 ft
(4–4.3 m)
52 in. (1.3 m)
48 in. (1219 mm) 33°60 in. (1.5 m)
84 in. (2.1 m)
>14 ft
(>4.3 m)
52 in. (1.3 m)
60 in. (1524 mm) 33°60 in. (1.5 m)
84 in. (2.1 m)
*7-in. (178-mm) downrod not available for 84-in. (2.1-m) fans.
**Damp-rated fans installed in covered outdoor locations can be mounted to flat ceilings only.