User's Manual

4
3. Getting Started
3.1 Installation of SIM Card
The phone is allowed to install 2 SIM cards provided by different network service providers.
With this two SIM cards, you can use the various functions of the phone, SIM cards store a number of parameters required for communications and also personal data,
including the PIN code (personal identification numbers), phonebook , short message and other additional services.
WARNING: Do not distort or scratch SIM card, also it should not be allowed contact with static electricity, dust or water; if the SIM card is lost, please do not hesitate to
contact your network operator for help.
Please power off your phone before installing SIM card, then install SIM card to the back side of the phone (as shown below figures )
Note: SIM card is a small object, please be
away from children, in order to avoid that children swallow it to mouth!
3.2 Installation of Memory Card
Because the phone does not have enough storage space, if you need to use some features, it is required to install the memory card (T-FLASH memory card)
Installation of T-flash card: insert T-flash card into the card slot correctly.
Removal of T-flash card: press T-flash card lightly, the card will be removed from the slot.
Note:
Note:T-flash card is a small object, please be
away from children, in order to avoid that children swallow it to mouth!
3.3 Installation of Battery
Your phone is suitable for the use of with original batteries and accessories, the battery when not in use, we recommend that you put them in the protection box.
Please follow the following figures to install the battery.
Note: Please correct operation in accordance with the figure in order to prevent damage to the battery contact piece.
3.4 Battery Charge
A new battery needs a full charge and discharge for several times so that its performance achieves optimal performance.
When the battery runs out of charge, please charge in time, the over discharge damage your battery.
After the battery is full, please disconnect the connection of charger and AC power, and then disconnect the connection of charger and cell phone.
Please follow the below figure to connect the charger:
The icon of battery capacity will display in animation from right to left when the phone is on, after full charging, the icon will show full grid.
When the battery is being charged, there is a slight fever, this is a normal phenomenon.
3.5 Note on Using battery
Battery performance is influenced by many factors, including your wireless bearer network configuration, signal strength, the temperature at the time of the use of mobile
phone; accessories, voice, data or others .
In order to achieve the best battery performance, please observe the following rules:
 While charging, maintain battery at room temperature or near room temperature environment;
 After the long-term use, the batteries will gradually wear and tear, it needs to take a long time to charge, this is a normal phenomenon. But after normal charge, it
is found that call time is reduced and the charging time is increased, then you need to purchase the original battery or the authorized battery by the company, the
Camera
Flash Light Camera Lens