Assembly Instructions

Insert glides or casters into each leg
of the base.
Slide footring (if enclosed) onto
cylinder. Ensure the tubular ring faces
upward. Tighten handwheel securely.
Slide the cylinder into the center of
the base.
CHAIR ASSEMBLY INSTRUCTION GUIDE
for BEVCO WESTMOUND/DORAL/EVERLAST/DURA CHAIRS
4000/5000/7000/7000D/8000 Series Non-Tilt Models
Five-star Base
(1)
Footring
(optional)
(1)
Glides/Casters
(5)
Seat w/control
Mechanism
(1)
Armrests
(optional)
(2)
Pnuematic Cylinder
(1)
Backrest
w/hinge assembly
and handwheel
(1)
Support bar
(1)
PARTS LIST
1 2 3 4
5 6 7
If you have any questions or concerns, please contact BEVCO customer service at 800-864-2991
OPTIONAL ARMREST ASSEMBLY
Remove handwheel and white washer
from hinge assembly on back. Slide
screw through slot in back support bar so
it is aligned with the two raised squares
on hinge assembly, then position white
washer against back bar and then tighten
handwheel securely.
Optional arms available on Doral &
Everlast chairs. Slide arm bracket into
mounting plate attached underneath
seat. Tighten handwheel securely.
Slide bottom of back support bar
into the opening of the control
mechanism underneath back of
seat. Tighten handwheel securely.
Place seat with control mechanism
onto the end of the pneumatic
cylinder. Sit on seat to secure t
onto cylinder.
Seat w/control
mechanism
Vertical
Adjustment
Control
GLIDE/CASTER
ASSEMBLY
DETAIL