Specification Sheet

SPECIFICATION SHEET
WCN1 SERIES
Chimney
WCN1
BEST | Hartford, WI | 1 800-558-1711 | www.BestRangeHoods.com
BEST | Drummondville, Qc | 1 866-737-7770 | www.BestRangeHoods.ca
Sleek curved design to perfectly match your modern decor.
SIZE MODEL NO. GREASE FILTERS (replacement)
30 in. or 36 in. WCN1306SS or WCN1366SS S99528414 (2 required)
99046207B
FEATURES
Max. Blower Airflow 685 CFM*
Finish 430 Stainless Steel no. 4 Brushed
Mounting type Wall
Telescopic Flue Accomodates 8-ft. to 9-ft. ceilings
Blower type
Centrifugal
Control type 4-Speed Capacitive Control
• Lights, low/medium/high
• Blower, 4-speed selection
• Delay-off Timer
Lighting 2 LED modules, 6 W per module
Grease Filters Dishwasher-safe, mesh with decorative
stainless steel plate
AC INPUT
120V, 60 Hz - 3.6 AMPS
OPTIONAL ACCESSORIES (sold separately)
Make-up Air Damper MD6TU, MD8TU
Baffle Filters Kit (set of 2) AFBWCN1
Non-Duct Recirculation Filters S99010512
Non-Ducted Recirculation Kit ANKWCN1
10’-11’ Flue Extension AEWCN1SS
RECOMMENDED MOUNTING HEIGHT
24-in min. to 30-in. max. from cooktop to bottom of hood
(See instructions for more info based on various ceiling heights)
LIMITED WARRANTY
5-year
2-year (labour only)
(See installation manual for full warranty text.)
FOR INDOOR USE ONLY
0
0.5
1
1.5
2
2.5
0 100 200 300 400 500 600 700
Stac pressure (in.w.g.)
Ai rfl ow (cfm)
Ver cal High Speed
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are
avaialable to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in AMCA’s state-of-the-art test laboratory. Sones are a measure of
humanly-perceived loudness, based on laboratory measurements.
HVI PERFORMANCE
Duct
Orientation
Size Damper
Sones CFM
Speed 1 Speed 2* Speed 3* Speed 4 Speed 1 Speed 2* Speed 3*
Speed 4
0.25 in. w.g.
Speed 4
0.1 in. w.g.
Round - Vertical 8 in. Included 0.9 2.5 4.0 11.0 160 240 300 580 600‡
* Where noted performance rating is not HVI certified but was established in accordance with HVI Standardized test procedure.
‡If needed, ask a recommended installer to limit discharge to 300 CFM or 400 CFM.

Summary of content (2 pages)