INSTRUCTION MANUAL Steel Garden Wagon with Handle Ver.
Thank you for choosing us! Since 2002, Best Choice Products has been bringing customers high-quality products at the absolute lowest price. With everything ranging from instruments and toys to furniture and outdoor, we’ve got your everyday living essentials covered. We’re centered around a customer-first philosophy – with free shipping, exceptional customer service, and a catalog sourced with you in mind. Pg. 22 Pg.
NOTICE Please retain these instructions for future reference. • Please do not exceed the weight limitations of this item. • Use a hand or foot pump to inflate tires to a maximum of 25 PSI. • Do not sit or ride in this wagon. • Do not allow children to use this item unsupervised. This is not a toy. • Always distribute the load evenly over the surface of the wagon. • Do not load weight on the edges of the wagon. • Do not operate in the vicinity of sharp or dangerous objects that could damage the tires.
PARTS A BOTTOM FRAME B 1 PC D YOKE FRONT PANEL E FRONT AXLE 1PC Pg.
PRODUCT ASSEMBLY Please retain these instructions for future reference. 1 B C x2 Attach part C rear struts to both ends of part B rear axle frame. 2 x4 x4 9 3 5 x4 K L D 7 J Use a part 3 bolt, part 5 nut, and part 9 flat washer to attach part D yoke, part J front axle, and part L front axle brace together. Use three part 3 bolts, three part 5 nuts, and three part 9 flat washers to attach part K center brace to part D yoke and part J front axle with a part 7 open pin. Pg.
PRODUCT ASSEMBLY 3 I H x2 1 G x8 A Attach part G front panel, part I side panels, and part H rear panel to part A bottom frame using two part 1 B pins for each panel. 4 x10 5 x10 3 x10 9 Attach the completed item from step 1 to part A bottom frame using six part 3 bolts, six part 5 nuts, and six part 9 washers. Attach the completed item from steps 2 to part A bottom frame using four part 3 bolts, four part 5 nuts, and four part 9 washers. Pg.
PRODUCT ASSEMBLY 5 8 5 E 9 4 Attach part 8 handle coupler and part E handle to part D yoke using a part 4 bolt, part 5 nut, and part 9 washer. NOTE: Firmly tighten the hardware at the end of this step 6 F x4 6 2 x4 x4 Insert four part F wheels into part J front axle and part B rear axle frame using a part 2 washer and part 6 nut for each wheel. Use the air pump to inflate the wheels to a maximum of 25 PSI. NOTE: Use pliers to bend the pin and lock the wheel in place. Pg.
ASSEMBLY IS COMPLETE! PRODUCT WARRANTY INFORMATION All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included. All returned items will receive a full refund back to the original payment method. All returned items will not be charged a re-stocking fee.
