BERTAZZONI INSTALLATION MANUAL FREESTANDING ELECTRIC RANGES 3100295 WWW.BERTAZZONI.
/ Table of contents TABLE OF CONTENTS WARNINGS ___________________________________________________________________ DATA RATING LABEL ___________________________________________________________ BEFORE INSTALLATION ________________________________________________________ VENTILATION PREPARATION ____________________________________________________ SPECIFICATIONS ______________________________________________________________ CLEARENCE DIMENSIONS ______________________________________________________ INSTALLATI
/ Models Models Models MAST365INMXE PROF304INMXE MAST365INSXT PROF304INMXT PROF304INSART PROF304INSBIT PROF304INSGIT PROF304INSNET PROF304INSROT PROF304INSXT PROF365INSART PROF365INSBIT PROF365INSGIT PROF365INSNET PROF365INSROT PROF365INSXT 3
/ Warnings WARNINGS To ensure proper and safe operation, the appliance must be properly installed and grounded by a qualified technician. DO NOT attempt to adjust, repair, service, or replace any part of your appliance unless it is specifically recommended in this manual. All other servicing should be referred to a qualified servicer. FOR THE INSTALLER: Before installing the Bertazzoni appliance, please read these instructions carefully.
/Data rating label DATA RATING LABEL The data rating label shows the model and serial number of the range.
/ Before installation BEFORE INSTALLATION • This appliance shall only be installed by an authorized professional. • This appliance shall be installed in accordance with the manufacturer’s installation instructions. • This appliance must be installed in accordance • with the norms & standards of the country where it will be installed.
/ Ventilation preparation / Specifications VENTILATION PREPARATION Hood Placement: This range will best perform when installed with Bertazzoni exhaust hoods. These hoods have been designed to work in conjunction with the Bertazzoni range and have the same finish for a perfect look. Before installation of the exhaust hood, consult local or regional building and installation codes for additional specific clearance requirements.
/ Clearence dimensions CLEARENCE DIMENSIONS Installation adjacent to kitchen cabinets This range may be installed directly adjacent to existing countertop high cabinets (36” or 91.5 cm from the floor). For the best look, the worktop should be level with the cabinet countertop. This can be accomplished by raising the unit using the adjustment spindles on the legs.
/ Installation requirements / Electrical connection INSTALLATION REQUIREMENTS ELECTRICAL A properly-grounded horizontally- mounted electrical receptacle should be installed no higher than 3” (7.6 cm) above the floor, no less than 2” (5 cm) and no more than 8” (20,3 cm) from the left side (facing product). Check all local code requirements. ELECTRICAL CONNECTION Warning! ELECTRICAL SHOCK HAZARD Disconnect electrical power at the circuit breaker box or fuse box before installing the appliance.
/ Electrical connection FOUR-WIRE CONN.RECEPTACLE NEMA 14-50R THREE-WIRE CONN.RECEPTACLE NEMA 14-50R Check your local code for which of the options below should be used in grounding the receptacle power supply connections.
/ Wiring diagram WIRING DIAGRAM The electric wiring diagrams and schematics are attached behind the range, and should not be removed except by a service technician, then replaced after service. DFM 3 5 4 INDUCTION COOKTOP 2 1 543 2 1 COLOURS n a gr v gv r m White Blue Black Orange Grey Violet Green Red Brown MV RC MVT Description b Simb.
/ Wiring diagram DFS Brown EG CMV up to CN23 - 3 to CN23 - 2 to CN23 - 1 PT RC FS n bi A B MT a to MV RC a CN21 b CN30 MVT up v r b v MV RP b RG+RC bi a LF bi 2 1 5 43 2 1 3 5 r bi 2 n TSS GROUND bi n R1 R2 R3 R4 R5 1 r [to M-L1] bi [to M-L2] [to ground] to M-L1 to CN27 - 6 to CN27 - 5 to CN26 - 2 to CN26 - 3 MVT down n 4 INDUCTION COOKTOP DL nK LF to M-L1 to M-N to GROUND to DL to DL to M-L1 to DL to DL to M-N to M-L1 n to M-L1 n to M-L1 n to M-L1 t
/ Installation INSTALLATION APPLIANCE INSTALLATION Unpacking the range • Remove all packing materials from the ship- • • • • ping pallet but leave the adhesive-backed foam layer over brushed-metal surfaces to protect it from scratches until the range is installed in its finalposition. Only the film on the side panels should be removed before inserting the range between the cabinets. Examine the appliance after unpacking it. In the event of transport damage, do not plug it.
/ Installation INSTALLING THE LEGS Bertazzoni ranges must be used only with the legs properly installed. Four height-adjustable legs are supplied with the range in the polysterene container situated over the appliance. Before installing the legs, position the appliance near its final location as the legs are not suitable for moving the appliance over long distances. After unpacking the range, raise it enough to insert the legs in the appropriate receptacles situated on the lower part of the appliance.
/ Installation INSTALLING THE ISLAND TRIM INSTALLING BACKGUARD (OPTIONAL) The island trim must be installed prior to operation of the appliance for appropriate ventilation of the oven compartment. The island trim is only placed on the cooktop, remove all tape and packaging before installing it. The backguard must be installed prior to operation of the appliance for appropriate ventilation of the oven compartment. The backguard is an optional contact you dealer for buying it.
/ Installing the anti/tip devices INSTALLING THE ANTI/TIP DEVICES ANTI-TIP BRACKETS ANTI/TILT CHAIN The anti-tip bracket shipped with the range must be properly secured to the rear wall as shown in the picture below. The height of the bracket from the floor must be determined after the range legs have been adjusted to the desired height and after the range has been levelled. Measure the distance from the floor to the bottom of the anti-tip bracket receptacle on the back of the appliance.
/ Installation checklist / final preparation INSTALLATION CHECKLIST A qualified installer should carry out the following checks: Range mounted on its legs Island trim or Backguard attached according to instruction Anti-tip device properly installed Clearance to cabinet surfaces as manufacturer’s guideline FINAL PREPARATION • Before using the oven, remove any protective wrap from the stainless steel.
/ Bertazzoni service BERTAZZONI SERVICE Bertazzoni is committed to providing the best customer and product service. We have a dedicated team of trained professionals to answer your needs. If you own a Bertazzoni appliance and need service in the US or Canada please use the following contact information: e-mail: aftersaleservice@bertazzoni.com Telephone - Monday through Friday, 7.30am to 7.30pm EST (except US public holidays).
