Operation Manual

39 Appendix: Assembling your monitor with a height adjustment stand (HAS)

Appendix: Assembling your monitor with a height

adjustment stand (HAS)

How to attach the monitor base

• If the computer is turned on you must turn it off before continuing.

Do not plug-in or turn-on the power to the monitor until instructed to do so.

• The following illustrations are for your reference only. Available input and output jacks may vary depending on

the purchased model.

Please be careful to prevent damage to the monitor. Placing

the screen surface on an object like a stapler or a mouse will

crack the glass or damage the LCD substrate voiding your

warranty. Sliding or scraping the monitor around on your

desk will scratch or damage the monitor surround and

controls.

Protect the monitor and screen by clearing a flat open

area on your desk and placing a soft item like the

monitor packaging bag on the desk for padding.

Gently lay the screen face down on a flat clean padded

surface.

While holding the monitor firmly against the desk, pull

the monitor stand arm upwards clear of the monitor.

Orient and align the stand base socket with the end of

the stand arm, then push them together. Tighten the

thumbscrew on the bottom of the monitor base as

illustrated.

Gently attempt to pull them back apart to check that

they have properly engaged.

Carefully lift the monitor, turn it over and place it

upright on its stand on a flat even surface.