R
Product Overview Thank you for purchasing the bēm wireless Party Block. Our speaker will bring you a new found freedom from wires while delivering an incredible sound. The Party Block is compatible with all devices enabled with Bluetooth© technology... which is currently a lot of devices! Meet the Party Block Before learning your Party Block, take a moment to look it over and familiarize yourself with its features.
Getting Started Product Interface: Satellite Speaker We know you are excited to experience your new Party Block. These two easy steps will get you up and running quickly. 9 Step 1: Power It • Connect your Party Block Sender to an outlet using the included 5V,2A power adapter. It will start charging the Sender. The power indicator will flash slowly during charging and goes out when it has reached a complete charge (Approx. 3.5 hours). • 1 2 3 4 5 6 7 8 10 11 1. 2. 3. 4. 5. 6. 7.
Step 2: Connect it (continued) Next time the Party Block and connected device will pair automatically. After completing this step you are ready to start playing audio from your connected device. Holding the Power button for 5 seconds will disconnect the connected device and enter pairing mode for pairing a new device. Direct Connection The Party Block can also be connected to any device that has a headphone jack or line out using the included aux cable.
Connection Laptop / notebook / PC As the Bluetooth© versions for these types of devices varies greatly, the connection methods will differ as well. If you can not connect with the Party Block using the previous method instructed you may need to install a new version of the Bluetooth© driver. Please reference the instructions of your device for details. Speaker Placement The Sender unit has built-in battery and is portable. This allows the perfect placement of the sender unit for maximum distance.
Troubleshooting Issue: Pairing is unsuccessfully after multiple attempts Solution: • Check if the Bluetooth© indicator light is on. If the indicator light is off, please press the power button to turn the unit on. If the Bluetooth© indicator light still doesn’t come on after pressing the power button, please charge the unit. • Check for other Bluetooth© devices around the surroundings that may interfere with searching and turn devices off.
FCC Statement (cont.) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
16 Safety Instructions Safety Instructions (cont.) This product is specially designed based on the full attention to safety; in order to make sure the accident-free operation, please abide the guidelines listed below: • Always position the unit on a stable and level surface.
IC ID STATEMENT - English: " This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.
