Use and Care Manual




Maintenance and care manual.
Simple care can provide you with many years of like-new look and trouble-free operation.
- Avoid direct contact with water, fire, sunlight exposure;
- Avoid rough handling of doors and door units;
- All doors must be transported in containers, on pallets or other devices, protecting them from damage, moisture,
precipitation or sunlight exposure;
- The door assembly in newly built or repaired premises is allowed only after the building materials have dried out
completely;
- Prior to the installation, doors and door units must be kept at the place of installation 3-4 days before they achieve
optimum humidity and temperature parameters;
- Door unit installation should be carried out by trained and properly qualified specialists;
- Prefinished door units should be installed after the floor, ceiling and wall priming and painting is over, in order
to secure the door finishes from getting stained and/or dirty;
- Only detergents (not water!) suitable for corresponding surfaces (veneer, enamel, polypropylene) and containing
no abrasives and solvents can be used for cleaning a door unit;
- Aerosols for wooden furniture may be applied on a door unit to give the surface additional shine and freshness
(with reference to the recommendations on the use of aerosols);
- It is forbidden to knock on the door glass with objects that may cause the glass shattering.