Instructions / Assembly

Mark the position of the screw holes on the wall by measuring the space between the

mounting brackets on the back of the mirror. Vertical position (X) is decided by the

use. Use a spirit level to ensure the screws holes are in line.

Draw horizontal line

Mark the screw position

Drill the holes

for screw

Step 1

Insert the anchor into the screw hole for reinforcement.

Step 2

Step 3 Step 4

Attach the mirror to the wall by lowering the bracket onto the screws.

Screw

(2pcs)

Anchor

(2pcs)

Parts List (Included)

Model: 7610-MIRROR

Tools List (Not included)

Spirit Level

Tape Measure

Pencil Electrtic Drill

Drill Bit

Screwdriver

NOTE: SINK STYLE, SHAPE, FAUCET HOLES, CUTOUT ON TOP, VANITY MAY VARY FROM THE PICTURE ABOVE.

INSTRUCTIONAL PURPOSE ONLY.

Professional installation is recommended.

www.bellaterra-home.com

INSTALLATION

TIPS:

press down the

pin on this side

& press up the

one on another

side to pull out

the drawer box.

Use a spirit level to ensure the mirror is level from left to right, adjust if needed.

Licensed professional installation is recommended. These instruction are for

mounting into studs or other in-wall reinforcement, drywall alone is not sufficient

to support wall-hung vanities.

Other installation techniques may require a licensed professional.