Cell Phone User Manual

-I.

* Removing the Battery

I. Turn the power off. (If power is not off, a loss of

stored numbers and messages may occur.)

2. Push and hold down the battery release latch on the

back of the phone and slide out the battery.

Release

Latch

,---

a Using the Battery Pack

i'I

* Battery Charge level

The battery charge level is shown at the top right of

the LCD screen on the phone.

* Installing the Battery

The Battery pack is keyed so it can only fit one way.

I. Align the groove in the battery pack with the rail on

the back of the phone until the battery pack rests

flush with the back of the phone.

2. Slide the battery pack forward until it clicks. This

locks the battery in place.

lliU

lYiJ

~~Ci]C""]

Rail

Groove

Charge the battery full before the initial use of the

phone.

The phone comes with a rechargeable battery pack. On

purchasing the phone, one must charge the battery full.

Keep the battery charged while not in use in order to

maximize talk time and standby time when using the

phone remotely.

Full Capacity Battery needs charging

When the battery charge level r'f~1 ItJ O

becomes low, the low battery

..LOW BAmRY

sensor will alert you In three WARNING!

ways: sounding an audible tone, '-

blinking the battery icon outline, ~

and displaying "LOW BATfERY 'f.1 [j]

WARl~ING" If the batte ry char"e LowORnERY

." WARNING

level becomes exceedingly low, Phone isluming off!

the phone will automatically ~

switch off and any function in

progress will not be saved.