LED Ceiling Fan ITEM #3550513 MODEL #F-1008 BN/SIL Canopy x1 Downrod x1 Blades x3 C B Mounting Bracket x1 E Flange Cover x1 D Fan Motor Assembly x1 F E Blade Screw and Washer x 10/13 Wire Nut x3 Expansion Sleeve x2 Pull Chain and Fobs x1 5/32 Screw and Lock Washer x2 FF EE Wood Screw and Flat Washer x2 FF Dual Mounting Screws x3 Balance Piece and Tape x3 Balance Clip x1 Instruction Sheet x1
Make sure that the fan voltage (120) is compatible with your own electrical system. Check to make sure that your carton contains all the parts mentioned in the parts list. NOTE: The box can be used as a work space to prevent any damage on the ornamental surface. CAUTION: Before installing, choose a location for mounting the fan where the blades have at least 7 feet of clearance from all objects and floor.
5. If using hugger mount installation, remove rubber washer from bottom of the canopy (C). 5 Note: Flange cover is not used with this type of installation. 6. If necessary, remove every other screw and lock washer from top of motor housing. (These screws may already be in a hardware pack.) C 6 10. Temporarily lift canopy (C) to mounting bracket (B) to determine which screws align with slotted holes in canopy (C) and partially loosen these screws. Remove the other two screws.
• Because of the fan's natural movement, some connections may become loose. Check the support connections, brackets and blade attachments twice a year. Make sure they are secure. • There is no need to oil your fan. The motor has permanently-lubricated bearings. •Dust your fan periodically with a soft, dry cloth. Do not use harsh cleaners or materials as they may damage the unit. •To prevent bending the blades during cleaning, support the blades so that no pressure is applied to them.