Freezer User manual BVF404W EN / 58 5791 0000/AD
Dear Customer, Please read this user manual before using the product. Thank you for preferring this product. We hope that you get the best results from your product which has been manufactured with high quality and state-ofthe-art technology.. Therefore, please read this entire user manual and all other accompanying documents before using the product. Follow all warnings and information in the user manual. Thus, you can protect yourself and your product against potential dangers. Keep the user manual.
1 Safety Instructions 4 1.1 Intended Use.................................. 4 1.2 Safety for children, vulnerable persons and pets. . . . . . . . . . . . . . . . . . . 4 1.3 Electrical safety . . . . . . . . . . . . . . . . 5 1.4 Transportation safety . . . . . . . . . . 5 1.5 Installation safety . . . . . . . . . . . . . . 5 1.6 Operational safety . . . . . . . . . . . . . 6 1.7 Maintenance and cleaning safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 1.8 HomeWhiz. . . . . . . . . .
1- Safety Instructions • This section contains safety instructions that will help you to be protected against risks of personal injury or property damage. • The Manufacturer shall not be responsible for damages that may arise when these instructions are not followed. Installation and repair procedures must always be performed by the manufacturer, authorised service agent or a qualified person specified by the importer. Only use original parts and accessories.
Safety instructions 5. Keep the product in a way that it will not tip over. 6. Do not allow children play with the old product. • Never throw the product into fire for disposal. There is the risk of explosion! • If there is a lock on the door of the product, the key should be kept out of the reach of children. 1.3 Electrical safety • The product must be unplugged during installation, maintenance, cleaning, repairing and moving procedures.
Safety instructions product may tip over and cause injuries. • The installation location must be dry and well ventilated. Do not place carpets, rugs or similar covers under the product. Insufficient ventilation causes the risk of fire! • Do not cover or block the ventilation openings. Otherwise, power consumption increases and your product may get damaged. • Product must not be connected to supply systems such as solar power supplies.
Safety instructions • Do not climb on the product. There is the risk of falling and getting injured! • Do not damage the pipes of the cooling system with sharp or penetrating objects. The refrigerant that might come out when the refrigerant pipes, pipe extensions or surface coatings are punctured causes skin irritations and eye injuries. • Unless recommended by the manufacturer, do not place or use electrical devices inside the refrigerator/deep freezer.
Safety instructions • Cooling system of your product contains R600a refrigerant: Type of the refrigerant used in the product is indicated on the type label. This refrigerant is flammable. Therefore, pay attention not to damage the cooling system or the piping while the product is in use. If the piping is damaged: - Do not touch the product or the power cable, - Keep away potential sources of fire that may cause the product to catch fire. - Ventilate the area where the product is located. Do not use fans.
2 Environment instructions 2.1.Compliance with the 2.2.Compliance with WEEE Directive and Disposing RoHS Directive The product you have purchased of the Waste Product: This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life.
3 Your Freezer 3 1 2 4 5 1. 2. 3. 4. 5. C Control Panel Door shelf Glass shelves Drawers Adjustable front feet Figures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.
4 Installation 4.1 Appropriate Installation Location • Appropriate air ventilation must be provided around your product in order to achieve an efficient operation. If the product is to be placed in a recess in the wall, pay attention to leave at least 5 cm distance with the ceiling and side walls. Contact an Authorized Service for the installation of the product.
Installation 4.2 Installing the Plastic Wedges 4.4 Electrical Connection Plastic wedges supplied with the product are used to create the distance for the air circulation between the product and the rear wall. 1. To install the wedges, remove the screws on the product and use the screws supplied together with the wedges. 2. Insert the 2 plastic wedges onto the rear ventilation cover as illustrated in the figure. A B C • • • • 4.
Installation 4.5 Door Open Warning *May not be available in all models An audio warning signal will be given when the door of your product is left open for at least 1 minute. This warning will be muted when the door is closed or any of the display buttons (if any) are pressed. 4.7 Changing the door opening direction Door opening direction of your refrigerator can be changed according to the place you are using it. If this is necessary, please call your nearest Authorized Service. 4.
5 Preliminary preparation 5.1.What to do for energy saving A Connecting the product to electronic energy-saving systems is harmful, as it may damage the product. • For a freestanding appliance; ‘this refrigerating appliance is not intended to be used as a built-in appliance. • Do not keep the refrigerator doors open for long periods. • Do not place hot food or beverages into the refrigerator. • Do not overfill the refrigerator; blocking the internal air flow will reduce cooling capacity.
C C A sound will be heard when the compressor is engaged. It is normal to hear sound even when the compressor is inactive, due to the compressed liquids and gasses in the cooling system. It is normal for the front edges of the refrigerator to be warm. These areas are designed to warm up in order to prevent condensation. For some models, indicator panel turns off automatically 1 minutes after the door closes. It will be reactivated when the door is open or any button is pressed.
6 Operating the product 6.1 Indicator panel 1 2 3 12 11 10 4 5 6 9 8 14 13 7 1.On/Off Indicator: This icon ( ) come on when the freezer is turned off. All the other icons turn off. 4.Power failure/High temperature / error warning indicator : This light ( ) illuminates during power failure, high temperature failures and 2.Economic Usage Indicator: error warnings.
Operating the product 7.Key Lock Mode: Press Key Lock ( ) button continuously for 3 seconds. Key lock icon will light up and key lock mode will be activated. Buttons will not function if the Key Lock mode is active. Press Key Lock button continuously for 3 seconds again. Key lock icon will turn off and the key lock mode will be exite. Quick Freeze function will be cancelled automatically 52 hours later if you do not cancel it manually.
Operating the product 6.2 Freezing fresh food • Wrap or cover the food before placing them in . • Hot food must cool down to the room temperature before putting them in the refrigerator. • The foodstuff that you want to freeze must be fresh and in good quality. • Foodstuff must be divided into portions according to the family’s daily or meal based consumption needs. • Foodstuff must be packaged in an airtight manner to prevent them from drying even if they are going to be kept for a short time.
Operating the product Cooler Compartment Settings -20°C -21, -22, -23 or -24°C Fast Freezing Remarks This is the default, recommended setting. These settings are recommended when the ambient temperature is higher than 30°C or when you think the refrigerator is not cool enough due to frequent opening and closing of the door. Use when you want to freeze your food in a short time. Recommended for maintaining the quality of meat and fish products. 6.
7 Maintenance and cleaning Cleaning your fridge at regular intervals will extend the service life of the product. B WARNING: Unplug the product before cleaning it. • Never use gasoline, benzene or similar substances for cleaning purposes. • Never use any sharp and abrasive tools, soap, household cleaners, detergent and wax polish for cleaning. • For non-No Frost products, water drops and frosting up to a fingerbreadth occur on the rear wall of the Fridge compartment.
8. Troubleshooting Check this list before contacting the service. Doing so will save you time and money. This list includes frequent complaints that are not related to faulty workmanship or materials. Certain features mentioned herein may not apply to your product. The refrigerator is not working. • The power plug is not fully settled. >>> Plug it in to settle completely into the socket. • The fuse connected to the socket powering the product or the main fuse is blown. >>> Check the fuses.
Troubleshooting • The freezer or cooler door may be ajar. >>> Check that the doors are fully closed. • The product may be set to temperature too low. >>> Set the temperature to a higher degree and wait for the product to reach the adjusted temperature. • The cooler or freezer door gasket may be dirty, worn out, broken or not properly settled. >>> Clean or replace the gasket. Damaged / torn door gasket will cause the product to run for longer periods to preserve the current temperature.
Troubleshooting There is sound of wind blowing coming from the product. • The product uses a fan for the cooling process. This is normal and not a malfunction. There is condensation on the product’s internal walls. • Hot or humid weather will increase icing and condensation. This is normal and not a malfunction. • The doors were opened frequently or kept open for long periods. >>> Do not open the doors too frequently; if open, close the door. • The door may be ajar. >>> Fully close the door.
9 Beko Customer Care Before you call Beko for service or assistance... Refer to your User Guide and check the following: 1. 2. 3. 4. Your Appl iance is correctly installed. Your Appliance is connected to power. You are familiar with its normal mode of operation You have read the ‘Recommended solutions for the problems’ If after checking the points above, the problem still exists, please call our Beko Customer Care hotline as listed below:If calling from Australia....
