Product Information

Ultra-Lightweight, High-Density 12,000-Watt
Power Ampli er with DSP Control and
USB Interface
PA Ampli ers
iNUKE
NU12000DSP
Product Information Document
Superb Transient Response
We spent years  ne-tuning the high-density Class-D technology that gives the iNUKE
Series its oomph. By carefully selecting transistors with extremely high slew rates and
optimizing other proprietary parts of our circuitry, these amps react instantly to even the
most demanding bass impulses. When this amazing ampli er technology is combined with
our state-of-the-art switching-mode power supplies, these ampli ers provide tremendous
punch. Andbecause they are so much more e cient than conventional designs, they run
cooler and don’t require the massive heat sinks and heavy toroid transformers typically
associated with their conventional counterparts.
#
Delivers 2 x 6,000 Watts into 2 Ohms,
2 x 3,400 Watts into 4 Ohms,
2 x 1,700 Watts into 8 Ohms and
weighs less than 26.5 lbs / 12 kg
#
Ultimate reliability through
revolutionary cool-running
High-Density Class-D technology
with “near-zero” thermal buildup
#
Ultra-e cient switch-mode
power supply for noise-free audio,
superior transient response and
low power consumption
#
High-performance DSP and
24-bit/96 kHz converters deliver
ultimate signal integrity and
extreme dynamic range
#
DSP section features
sophisticated delay, crossover
(3  lter types, up to 48 dB/octave),
EQ (8 parametric, 2 dynamic),
dynamics processing and lockable
security settings
#
Front panel LCD display enables
setup and adjustment without PC
#
Can be set up, controlled and
monitored via front panel
USB connector. Powerful remote
software downloadable at
behringer.com
#
“Zero-Attack” limiters o er
maximum output level with reliable
overload protection
#
Built-in Subwoofer/Satellite
crossover for perfect
subwoofer operation
#
Detented and illuminated gain
controls for precise level setting
#
Precise 4-segment Signal and Limit
LEDs to monitor performance
Our light-as-a feather iNUKE power
amps have been wildly successful,
and we’ve sold truckloads of them all
over the world! Why? Because they
are ultra-dependable, put out massive
amounts of power, yet weigh so very
little thanks to our revolutionary
high-density Class-D technology and
ultra-e cient switch-mode power
supplies. But we think we may have
outdone ourselves with the new
iNUKE NU12000, which packs a whopping 12,000-Watt total output!
Yes, that’s right—a stereo power ampli er with 6,000 Watts output per
channel @ 2Ohms, or 2 x 3,400 Watts @ 4 Ohms—and it weighs less than
26.5 lbs. / 12 kg. This groundbreaking ampli er is also available in a USB-
addressable DSP version, the iNUKE NU12000DSP.
Class-D
Class-AB
Output Power
Eciency
100
80
60
40
20
020406080100