TDS

TECHNICAL DATA SHEETTECHNICAL DATA SHEET
BEHR PREMIUM™ CHALK DECORATIVE AEROSOL
PRODUCT INFORMATION
BEHR PREMIUM™ Chalk Decorative Aerosol is designed to deliver a smooth, matte nish that can be applied over most existing
surfaces with very little surface preparation. It has excellent adhesion and coverage. It is ideal for refreshing old and new
wooden furniture, cast stone, concrete, and even metal surfaces to create one-of-a-kind accent pieces. It also features an
ergonomic can shape that allows for more comfortable application.
RECOMMENDED USES:
Use on properly prepared surfaces such as:
• Wood • Metal • Plastic • Cast Stone • Wicker
COLOR AND SHEEN ON THE CAP IS REPRESENTATIVE OF THE PRODUCT. Not for touch-up on surfaces previously painted with
BEHR PREMIUM™ Chalk Decorative Paint.
PRODUCT SPECIFICATIONS:
Colors:
70844 Tin White
72844 Surf
73544 Gingham
74544 Classic Noir
74744 Morocco Red
75044 Linen White
75144 Chion Cream
75244 Aged Gray
75644 Black Evergreen
†
714044 Clear
Sheen: < 5 @ 85°
Resin Type: Modied Alkyd
Net Weight: 12 oz / 340 g
*% Solids by Volume: 17% ± 2%
*% Solids by Weight: 21% ± 2%
Max Product Weighted MIR:
Flat/Matte: 0.80
Clear: 0.85
Coverage: 12 sq ft per can, depending on the surface
texture, porosity and application method. Does not include
the loss of material from spraying.
APPLICATION:
• Cover adjacent areas to avoid overspray.
• Shake can vigorously for one minute after mixing ball
begins to rattle and often during use.
• Hold can upright, moving from side-to-side while spraying
lightly and evenly about 12" from area being painted.
• Always start and nish spraying o the object. Each spray
pass should overlap the previous pass by half.
• Test your spray application technique on a scrap surface or
inconspicuous area before starting the project.
• Apply multiple thin coats to prevent dripping and sagging.
Two to three thin coats produce best results. Allow to dry
between each coat.
†
NOTE: Use BEHR PREMIUM™ Chalk Decorative Clear
No. 714044 over glossy surfaces to create a matte nish.
Dry Time: @ 77°F (25° C) and 50% RH:
Allow to dry between each coat.
To Touch: 15 minutes
To Recoat: before 1 hour or after 24 hours
SURFACE PREPARATION:
• The surface must be clean, free of dust, grease, wax,
peeling paint, mold and mildew. If washing is necessary,
use a nonsoapy detergent or a TSP substitute. Rinse well
and allow to dry.
• Scrape o loose paint and sand to a smooth surface.
• For maximum adhesion, sand glossy surfaces thoroughly
before coating. For optimal adhesion to dicult surfaces
apply a coat of primer such as BEHR® Interior/Exterior
Bonding Primer, BEHR® Multi-Surface Interior/Exterior
Primer & Sealer No. 436 or KILZ® Original Aerosol (for
smaller areas).
WARNING! If you scrape, sand or remove old paint, you may
release lead dust. LEAD IS TOXIC. Contact Lead Information
Center at 1-800-424-LEAD or log on to www.epa.gov/lead.
CLEANUP/DISPOSAL:
• Clear spray valve immediately after use by turning can
upside down and spraying until only clear gas is released.
If spray nozzle becomes clogged, remove and clean with
VOC-compliant paint thinner or mineral spirits where
allowed. Otherwise use acetone.
• Clean fresh overspray with VOC-compliant paint thinner or
mineral spirits. Otherwise use acetone. Remove dried paint
with paint remover, but test small area rst to ensure paint
remover does not damage substrate.
• Please consider donating any unused product. For
recycling or disposal information contact your local
household refuse collection service.
CAUTIONS/LIMITATIONS:
• Do not stick pins or wire into can opening.
• Ensure adequate ventilation when spraying indoors.
• For best results, apply when air, material and surface
temperatures are between 50°F and 90°F. Avoid painting
in direct sunlight. Temperature and humidity extremes can
aect dry time and nal appearance.
• Shelf life under normal conditions is two years unopened.
GENERAL INFORMATION:
DANGER! EXTREMELY FLAMMABLE LIQUID AND VAPOR.
VAPORS MAY CAUSE FLASH FIRE. VAPOR HARMFUL.
CAUSES SERIOUS EYE DAMAGE. IRRITATES SKIN AND
RESPIRATORY TRACT. VENTILATION REQUIRED: To avoid
inhalation and combustion hazards (see below), DO NOT
use this product unless you can achieve cross ventilation
by opening windows and doors during application
and drying. MAY CONTAIN ACETONE, PROPANE,
BUTYL ACETATE, ISO BUTANE, N-BUTANE, CALCIUM
CARBONATE, METHYL ETHYL KETONE, 2-PROPANOL
1-METHOXY- 2 ACETATE, DISTILLATES (PETROLEUM),
STODDARD SOLVENT, TOSYLAMIDE/FORMALDEHYDE
RESIN, NAPHTHA (PETROLEUM), CARBON BLACK,
ZIRCONIUM CARBOXYLATE, COBALT CARBOXYLATE,
TITANIUM DIOXIDE and CRYTSALLINE SILICA. VAPOR
HARMFUL: May aect the brain or nervous system
causing dizziness, headache or nausea. CAUSES SERIOUS
EYE DAMAGE. IRRITATES SKIN, NOSE AND THROAT.
Do not breathe vapors or spray mist. If you experience
eye watering, headaches or dizziness, increase fresh
air, wear respiratory protection (NIOSH/MSHA TC 23C
or equivalent) or leave the area. VAPORS MAY IGNITE
EXPLOSIVELY. Do not spray near sparks, heat or open
ame. Do not smoke. Vapors are heavier than air and can
travel at oor level to distant ignition sources. Extinguish
all ames and pilot lights and turn o stoves, heaters,
electric motors, high intensity lights and other sources
of ignition during use and until all vapors are gone.
WARNING-CONTENTS UNDER PRESSURE. Do not
puncture or incinerate container. Do not expose to
heat or store at elevated temperatures above 120°F.
*Values given here are from BEHR PREMIUM™ Chalk Decorative Aerosol White Color.
This information is provided “as is” and no representations or warranties, either express or implied, of merchantability, tness for a particular purpose or of any other
nature are made with respect to this information or to any product referred to in this information. For SDS or to consult with a Behr Paint Company representative, call
1-800-854-0133 Ext. 2 (U.S.A. only). ©2022 Behr Process Corporation, Santa Ana, CA 92705 U.S.A.
Revised 11/2022
1 of 2