SDS

ManualsBrandsBEHR DYNASTY ManualsPaint5 gal. #PPU26-10 Chic Gray Eggshell Enamel Interior Stain-Blocking Paint & Primer

SAFETY DATA SHEET

1. Identification

Product identifier

Other means of identification

Product code

Recommended use

BEHR DYNASTY™ Interior E

ggshell Enamel Paint Color Sample − Ultra Pure White

DY610

Architectural Coating

None known.

Recommended restrictions

Manufacturer/Importer/Supplier/Distributor information

Behr Process Corp.

Supplier

1801 E. St. Andrew Place

Santa Ana, CA 92705

714-545-7101

Telephone

+1 760 476 3962

Emergency telephone

+1 866 519 4752

335213

Access code

2. Hazard(s) identification

Not classified.

Physical hazards

Category 1Sensitization, skin

Health hazards

Not classified.

OSHA defined hazards

Label elements

Signal word

Warning

Hazard statement

May cause an allergic skin reaction.

Precautionary statement

Prevention

Avoid breathing mist/vapors. Contaminated work clothing must not be allowed out of the

workplace. Wear protective gloves.

Response

If on skin: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention.

Wash contaminated clothing before reuse.

Storage

Store away from incompatible materials.

Disposal

Dispose of contents/container in accordance with local/regional/national/international regulations.

Hazard(s) not otherwise

classified (HNOC)

None known.

Supplemental information

None.

3. Composition/information on ingredients

Mixtures

13463-67-7 10 - 30Titanium dioxide

CAS number %Chemical name

112926-00-8 5 - 10Silica gel, precipitated,

crystalline-free

2682-20-4 0 - 0.12-Methyl-2H-isothiazol-3-one

26172-55-4 0 - 0.15-Chloro-2-methyl-2H-isothiazo

l-3-one

SDS US

BEHR DYNASTY™ Interior Eggshell Enamel Paint Color Sample− Ultra Pure White

956018 Version #: 01 Revision date: - Is

sue date: 17-December-2020

1 / 7

Summary of content (7 pages)

PAGE 1
SAFETY DATA SHEET 1. Identification Product identifier BEHR DYNASTY™ Interior Eggshell Enamel Paint Color Sample − Ultra Pure White Other means of identification Product code DY610 Recommended use Architectural Coating Recommended restrictions None known. Manufacturer/Importer/Supplier/Distributor information Supplier Telephone Emergency telephone Access code Behr Process Corp. 1801 E. St. Andrew Place Santa Ana, CA 92705 714-545-7101 +1 760 476 3962 +1 866 519 4752 335213 2.
PAGE 2
Composition comments All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume. The manufacturer has claimed the exact percentage as trade secret under the OSHA Hazard Communication Standard. 4. First-aid measures Inhalation Move to fresh air. Call a physician if symptoms develop or persist. Skin contact Eye contact Remove contaminated clothing immediately and wash skin with soap and water.
PAGE 3
8. Exposure controls/personal protection Occupational exposure limits US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) Components Type Titanium dioxide (CAS 13463-67-7) US. OSHA Table Z-3 (29 CFR 1910.1000) Components Silica gel, precipitated, crystalline-free (CAS 112926-00-8) Value Form PEL 15 mg/m3 Total dust. Type Value Form TWA 0.8 mg/m3 20 mppcf Titanium dioxide (CAS 13463-67-7) TWA US.
PAGE 4
pH 7 - 10 Melting point/freezing point Not available. Initial boiling point and boiling range > 99 °F (> 37.2 °C) Flash point Not applicable. Evaporation rate Not available. Flammability (solid, gas) Not applicable. Upper/lower flammability or explosive limits Not available. Flammability limit - lower (%) Flammability limit - upper (%) Not available. Vapor pressure Not available. Vapor density Not available. Relative density Not available.
PAGE 5
Components Species Test Results Silica gel, precipitated, crystalline-free (CAS 112926-00-8) Acute Dermal LD50 Rabbit > 2000 mg/kg Inhalation LC50 Rat > 2200 mg/m³, 4 hours Oral LD50 Rat > 5000 mg/kg Rat > 5000 mg/kg Titanium dioxide (CAS 13463-67-7) Acute Oral LD50 Skin corrosion/irritation Prolonged skin contact may cause temporary irritation. Serious eye damage/eye irritation Direct contact with eyes may cause temporary irritation.
PAGE 6
Waste from residues / unused products Contaminated packaging Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions). Since emptied containers may retain product residue, follow label warnings even after container is emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal. 14.
PAGE 7
US. Rhode Island RTK Titanium dioxide (CAS 13463-67-7) 16. Other information, including date of preparation or last revision Issue date 17-December-2020 Revision date - Version # 01 HMIS® is a registered trade and service mark of the ACA. D - Face Shield, Gloves, Apron Health: 2 Flammability: 0 Physical hazard: 0 Personal protection: D Further information HMIS® ratings List of abbreviations References Disclaimer DOT: Department of Transportation (49 CFR 172.101).