Datasheet

The Telaris Multifunction Tester Series offers two models that verify
the safety of electrical installations in residential, commercial and
industrial applications.
The Telaris ProInstall series has been developed to carry out
the following safety measurements of electrical installations in
accordance with EN 61557:
- Insulation resistance - RCD tests
- Low Ohm resistance - Earth ground resistance
- Loop impedance - Phase sequence
Multifunction Electrical
Installation
Tester Series
www.Amprobe.eu
Telaris ProInstall-100-EUR and ProInstall-200-EUR
• Testselectricalinstallationsforsafetyinaccordancewith:
EN61557,BS7671,IEC60364
• Lightweightandcompactforportability
• Easytouse,intuitiveinterfaceallowingyoutowork
immediatelyandefciently
• Insulationresistancemeasurementsupto1000VDC
• Fastloopmeasurementswithhightestcurrent
• Notriplooptest,doesnottripRCDs
• Easytoread,largebacklitLCDdisplaywithwideviewing
angle
• DataloggingcapabilitiesdownloadabletoaPC
For detailed specifications and ordering info go to www.Amprobe.eu 6000563A
©2013 Amprobe. All rights reserved.
TELARIS PROINSTALL SERIES COMPARISON TABLE
Specifications ProInstall-100-EUR ProInstall-200-EUR
Voltage&frequencydisplay
■ ■
LowOhmresistance
■ ■
Insulationresistance
■ ■
Loop/linetest
■ ■
LoopimpedancewithouttrippingRCDs
■ ■
PSC(short-circuitcurrent)
■ ■
RCDtriptime
■ ■
RCDtripcurrent(rampfunction)
■ ■
AutomaticRCDtestsequence
■
TestACandpulsedACsensitiveRCDs(TypeAC,typeA)
■ ■
TestDC-sensitiveRCDs(TypeB)
■
Earthresistancewithrods
■
Phasesequencetest
■ ■
Illuminateddisplay
■ ■
Memory
■ ■
For more detailed specifications see users manual.
Telaris ProInstall-100-EUR
Telaris ProInstall-200-EUR