Datasheet

www.Beha-Amprobe.de
The Telaris Multifunction Tester Series offers two models that verify
the safety of electrical installations in residential, commercial and
industrial applications.
The Telaris ProInstall series has been developed to carry out
the following safety measurements of electrical installations in
accordance with EN 61557 (DIN VDE 0413):
- Insulation resistance - RCD tests
- Low Ohm resistance - Earth ground resistance
- Loop impedance - Phase sequence
Multifunction Electrical
Installation
Tester Series
Telaris ProInstall-100-D and ProInstall-200-D
• Testselectricalinstallationsforsafetyinaccordancewith:
EN61557,BS7671,IEC60364
• Lightweightandcompactforportability
• Easytouse,intuitiveinterfaceallowingyoutowork
immediatelyandefciently
• Insulationresistancemeasurementsupto1000VDC
• Fastloopmeasurementswithhightestcurrent
• Notriplooptest,doesnottripRCDs
• Easytoread,largebacklitLCDdisplaywithwideviewing
angle
• DataloggingcapabilitiesdownloadabletoaPC
For detailed specifications and ordering info go to www.Beha-Amprobe.de 6000564A
©2013 Beha-Amprobe. All rights reserved.
TELARIS PROINSTALL SERIES COMPARISON TABLE
Specifications ProInstall-100-D ProInstall-200-D
Voltage&frequencydisplay
■ ■
LowOhmresistance
■ ■
Insulationresistance
■ ■
Loop/linetest
■ ■
LoopimpedancewithouttrippingRCDs
■ ■
PSC(short-circuitcurrent)
■ ■
RCDtriptime
■ ■
RCDtripcurrent(rampfunction)
■ ■
AutomaticRCDtestsequence
■
TestACandpulsedACsensitiveRCDs(TypeAC,typeA)
■ ■
TestDC-sensitiveRCDs(TypeB)
■
Earthresistancewithrods
■
Phasesequencetest
■ ■
Illuminateddisplay
■ ■
Memory
■ ■
For more detailed specifications see users manual.
Telaris ProInstall-100-D
Telaris ProInstall-200-D