Use and Care Manual

When properly installed and maintained, ceramic and porcelain tiles can be enjoyed for many years. Please be sure to familiarize
yourself and the installer with these instructions prior to starting the job. You and your installer are responsible for ensuring proper
installation of the tiles. If you have any questions, contact [e-mail] before moving forward.
RECOMMENDED INSTALLATION
PRODUCTS & TOOLS
RECOMMENDED ADHESIVES
For large format porcelain/ceramic tiles (any one edge greater
than 15"), a high quality, large-format thin-set mortar (formerly
medium-bed mortar) is recommended. For porcelain/ceramic
tiles that are not large format, a multi-purpose thin-set mortar is
recommended. For porcelain/ceramic tile mosaics, a premium
thin-set mortar is recommended. White or grey mortar is commonly
recommended for all porcelain/ceramic tile installations. Ensure you
follow the thin-set mortar Manufacturer’s guidelines with precision.
Recommended thin-set mortars for Large Format Tiles:
1. ARDEX X 5™
2. LATICRETE® 4-XLT or LATICRETE LHT
3. BOSTIK Big Tile & Stone
Recommended thin-set mortars for Non-large format Tiles:
1. ARDEX X4™
2. LATICRETE 253
3. BOSTIK Porcelain Mate
Recommended thin-set mortars for Mosaics:
1. ARDEX X77
2. LATICRETE 254
RECOMMENDED SEALERS & GROUT RELEASE
Polished and honed tiles are not pre-sealed at the factory.
Therefore, use of an impregnating or penetrating sealer must be
applied to these tiles prior to grouting or grout release must be
used. It is recommended to use a grout color that matches the most
predominant color of the tile.
Recommended sealers:
1. MIRACLE SEALANTS 511 Impregnator
2. STONETECH Bulletproof
Recommended grout release:
1. AQUAMIX Grout Release
RECOMMENDED GROUTS
1. Avoid using setting materials from different production
batches and check for bag-to-bag color consistency.
2. A urethane non-pigmented grout such as Bostik TruColor is
highly recommended for polished or honed porcelain tile.
3. For any non-polished or non-honed porcelain/ceramic tile,
a cement, urethane, or epoxy grout may be used. Most commonly,
cementitious grout is used.
4. For cementitious grout, to minimize staining and discoloration
over time, treat the grout joints with a penetrating sealer like
Grout Shield.
RECOMMENDED WET SAW CUTTING BLADES
1. Alpha 10" Porcelana Blade #PT101A+-Continuous Rim
(TLSPT10A);
2. BCE 10" Supreme Granite/Porcelain Blade-Continuous Rim
(BCEDB10POR)
3. DeWalt Premium Porcelain Blade-Slotted Rim
(DEWDW4764PORBLADE)
PREPARATION AND INSTALLATION
INSTRUCTIONS
APPLICATION
Porcelain and ceramic tiles may be installed in many different
applications. It is not recommended to use polished or honed
porcelain/ceramic tiles on exterior floors or areas subjected to
water or oil/grease exposure. Visit bedrosians.com for information
pertaining to specific product collections.
SUBSTRATE
Pursuant to the TCNA, for tile installations, special attention should
be given to substrate stability, rigidity and preparation. Substrates
should be sufficiently flat to allow uniform coverage and avoid
excessive mortar thickness. Clean the surface well to remove all
dirt and residue and remediate all cracks or unlevel areas in the
substrate to ensure it is smooth and flat prior to installation. Install
over a cured concrete surface or suitable sub-floor like Hardibacker
or Ditra. Wall installation on drywall is acceptable when installed
with appropriate non-sag setting materials.
CERAMIC &
PORCELAIN TILE
INSTALLATION,
CARE &
MAINTENANCE
INSTRUCTIONS