Owner Manual

Table Of Contents

Page 1 of 2

This product will take 15-20

minutes to assemble.

Reminders

1.Use only the hardware supplied.

2.Once the product is assemble,level and tighten all the bolts.

3.Do not over-tighten bolts.

4.This item may require periodic tightening

NOTE:

1.Two or two people are needed for assembly

2 please keep all hardware parts out of the reach of children.

36 '' ROUND SOLID FIXED TOP PEDESTAL TABLE

Thank you for purchasing this quality product.Be sure to check all packaging material

carefully for small parts that may have come loose inside the carton during shipment.

4 pcs

COMPONENT LIST:

HARDWARE LIST:

Flat Washer

Wrench

Lock Washer

Hex Nut

12 pcs

1 pce

FIGURE

DESCRIPTION

QTY

Table Top

Pedestal Stand

Pedestal Leg

1 pce

Hardware Bag

1 pce

Mounting Plate

Levelers

PART NO

FIGURE

DESCRIPTION

QTY

PAGE 1
36 '' ROUND SOLID FIXED TOP PEDESTAL TABLE Thank you for purchasing this quality product.Be sure to check all packaging material carefully for small parts that may have come loose inside the carton during shipment.
PAGE 2
36 '' ROUND SOLID FIXED TOP PEDESTAL TABLE ASSEMBLY : STEP 1 1.1-Turn the Pedestal Stand upside down on a soft protective surface. Attach Leg by inserting pedestal leg through per-drilled holes on pedestal. 1.2-Use Flat Washer(3), Lock Washer(2), Hex Nuts (1) and Wrench(4) to attached the pedestal Leg to the pedestal stand. 1.3-Repeat step 1.2 For the remaining pedestal legs Leg, once all pedestal leg been attached, turn the base assembly right side up.