SEQUEL® 20 6114 3-DRAWER FILE PEDESTAL INSTRUCTION MANUAL LET’S GET STARTED.
Congratulations on the purchase of your Sequel 20 3 Drawer File Pedestal 6114 from BDI. Your file pedestal has been designed to provide a lifetime of enjoyment. This manual will provide you with assembly instructions and other helpful information that will ensure that you get the most out of your file pedestal. Please save it for future reference. Your Sequel 20 File Pedestal has been engineered for simple assembly. Please follow these directions carefully to prevent any damage.
HARDWARE HARDWAREAND ANDCOMPONENTS COMPONENTS Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com. Do not use power tools for assembly of this product. For all other concerns, please contact your BDI retailer. PART # DESCRIPTION T1 Hex Wrench QUANTITY 1 PART # DESCRIPTION H2 M4 x 35mm Screw QUANTITY 4 | BDIUSA.
HARDWARE AND COMPONENTS PART # C1 DESCRIPTION Cabinet QUANTITY 1 PART # C2 PART # DESCRIPTION Leg DESCRIPTION QUANTITY 2 QUANTITY C3 Drawer Pull 3 PART # DESCRIPTION QUANTITY C4 Glass Top 1 TOOL REQUIRED (NOT INCLUDED) Phillips Screwdriver NEED ASSISTANCE? customerservice@bdiusa.com BDIUSA.
ASSEMBLY STEP 1. ATTACH THE LEGS Carefully position (C1) Cabinet onto its back. Install (C2) Legs using (H1) Screws and (T1) Hex Wrench. PART/DESCRIPTION QTY T1-HEX WRENCH 1 H1-SCREW 16 C1 H1 C2 H1 C2 C2 H1 H1 H1 6 | BDIUSA.
STEP 2. ATTACH DRAWER PULLS ASSEMBLY Open a drawer and connect a (C3) Drawer Pull using 2 (H2) Screws. Tighten with a Phillips Screwdriver (not included). Install the other 2 (C3) Drawer Pulls one at a time. PART/DESCRIPTION QTY H2-Screw 6 NOT INCLUDED Phillips Screwdriver 1 C3 C3 H2 C3 NEED ASSISTANCE? customerservice@bdiusa.com BDIUSA.
ASSEMBLY STEP 3. PLACE GLASS TOP Place (C4) Glass Top into position on top of the cabinet. Align all edges. The glass edge should be offset 1.5mm from the side of the cabinet on all four sides. C4 1.5 mm C1 FINE TUNING LEVEL CABINET If needed, dial out 1 or more levelers using the (T2) Leveler Wrench attain a level stance. PART/DESCRIPTION QTY T2-Leveler Wrench 1 T2 down 8 | BDIUSA.
FINE TUNING ARRANGING YOUR FILES Letter sized file folders fit side-to-side as shown. Legal sized file folders fit front-to-back. For Letter or A4 files facing front-to-back, attach (H5) File Bar Clip to both ends of (H4) Small File Bar as shown. Place the file bar assembly in the notches located on the left and right drawer side panels. For A4, slide the file bar backwards within the notch.
CARE & MAINTENANCE GLASS Glass surface is maintained using household glass cleaner and a paper towel or cloth. SATIN-ETCHED GLASS This uniquely smooth-to-the-touch glass surface can be regularly maintained using household glass cleaner and a paper towel or cloth. Minor scratches or scuffs not eliminated using paper towel or cloth can usually be removed by using a ‘Magic Eraser’. Magic Eraser is a melamine foam product available at any grocery store or home improvement center.
WARRANTY BDI warrants to the original purchaser that for the below stated warranty term, BDI will repair or replace any product, part, or component covered by this warranty which fails under normal use as a result of a defect in material or workmanship. BDI will repair or replace the aforementioned product, part or component with a comparable product, part or component. The decision to repair or replace will be at BDI’s sole discretion.
These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. Sequel & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2020, BDI | V.05.15.2020 Made in Vietnam.
