Assembly Instructions

ManualsBrandsBDI ManualsTV Stands & Entertainment CentersBDI Elements 8777-CO Natural Walnut With Wheat Doors Storage Console

Product Registration

Registering your new BDI product allows us to send you important

product updates, service information and helpful hints related to

your BDI products. Register today, and you will be entered to win

free a BINK table from BDI: www.bdiusa.com/register

Placement and Maintenance

Your Elements Console is designed for indoor use on level floors.

Clean wood veneer and steel parts with a moist cloth.

Elements is engineered for easy assembly. Carefully follow this

procedure to prevent any damage. Do not use power tools for

assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as

carpet. For missing hardware pieces, contact BDI Customer Service at: customerservice@bdiusa.com.

For all other concerns, please contact your BDI retailer.

bdiusa.com

customerservice@bdiusa.com

These distinctive product conﬁgurations are protected by US and international patents, trade dress, and/or

Made in China. 03.27.2017 V4

ELEMENTS

™

8779__CO__

4 DOOR CONSOLE

ELEMENTS

™

8777__CO__

3 DOOR CONSOLE

A1 Cabinet x 1

[quad (shown)

or triple wide]

C5 Back Panels x 2

C4 Side Shelf x 2

C3 Middle Shelf x 1

A2 Sub-frame

C2 Leg Frame x 2

T2 Hex Wrench x 1

H1 1/4-20 x 12 mm

Machine Screw x 8

H2 1/4-20 x 75 mm

Machine Screw x 8

T1 Phillips Screwdriver x 1

Note: Door

pattern may

be different

Your Elements cabinet includes an air-purifier pouch containing chemical-free, non-toxic, activated carbon.

This pouch is designed to absorb and remove traces of odor which may remain as a result of the unique

manufacturing processes used to create Elements. While any such odor will naturally dissipate over a period

of time, the pouch is provided to accelerate the effect. Please feel free to utilize the pouch inside the cabinet

indefinitely or transfer it to any other area in the home where you wish to manage moisture and odors. If you

choose to use it elsewhere (shoe racks, closets, basements, etc.), please be aware that the pouch can be

“re-charged” by placing in direct sunlight for 1-2 hrs after 2-3 months of continuous usage.

Summary of content (5 pages)

PAGE 1
ELEMENTS™ 8777__CO__ 3 DOOR CONSOLE ELEMENTS™ 8779__CO__ 4 DOOR CONSOLE Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today, and you will be entered to win free a BINK table from BDI: www.bdiusa.com/register Placement and Maintenance Your Elements Console is designed for indoor use on level floors. Clean wood veneer and steel parts with a moist cloth.
PAGE 2
Step 2 - Attach the 2 Leg frames C2 to Sub-frame A2 with 8 Screws H1 using Hex wrench T2. Make sure the red arrow on the sub-frame faces the same direction as the direction of the leg frames. C2 Red arrow H1 Screw x 8 T2 H1 A2 Step 3 Quad - With help from another person, carefully position the cabinet A1 upside-down (as shown) or on its back. Caution-do not remove blocking above the shelves. Attach the base to the cabinet with 8 Screws H2 using Hex Wrench T2.
PAGE 3
Step 3 Triple - With help from another person, carefully position the cabinet A1 upside-down (as shown) or on its back. Attach the base to the cabinet with 8 Screws H2 using Hex Wrench T2. Do NOT fully tighten until all 8 screws are started.
PAGE 4
Step 5 Quad Only - Adjustable Shelves With help from another person, carefully rotate your Elements Console onto its feet. The shelf pins located inside all three cabinet spaces may be repositioned using Screwdriver T1, allowing you to raise or lower Middle and Side Shelves C3 and C4 to the desired level. C4 C3 C4 T1 Step 6 - The 2 Back Panels C5 are removable and can slide towards the middle. To remove lift up and pull the bottom edge out of its groove.
PAGE 5
Fine tuning your new BDI Media Furniture These steps are to be followed after you have unpacked and completed the simple assembly instructions for your console. Due to jostling in freight or perhaps an uneven floor, the doors on your cabinet may not appear to be in perfect alignment. Making a few minor adjustments can rectify this situation. The high-quality European hinge hardware is adjustable.