Instructions / Assembly
• Read and follow all warnings and instructions on the LP cylinder.
• Specifications (These features and specifications MUST be present):
1. 20-lbs (9.1 Kg); 12.5-in (31.75-cm) diameter x 18-in (45.72-cm) tall
2. Type-1 gas cylinder valve outlet to accommodate the hose and regulator supplied with this
appliance. The Type-1 valve must prevent gas flow until a positive seal is obtained.
3. Over-Filling Protection Device (OPD)
4. Collar to protect the cylinder valve
5. Cylinder must be arranged for vapor withdrawal
6. Protective cap
• The LP cylinder must be constructed and marked in accordance with the specifications for LP gas
cylinders, U.S. Department of Transportation (DOT) or the Standard for Cylinders, Spheres and
Tubes for the Transportation of Dangerous Goods, CAN/CSA-B339.
• If you exchange the LP cylinder, make sure the new tank complies with all the specifications listed
here.
LIQUID PROPANE (LP) CYLINDER
CARBON MONOXIDE HAZARD
This appliance is designed to only operate using Liquid Propane (LP) gas in a self-contained gas supply
system (tank). Please follow these instructions for proper specifications and operation.
A. Never store a spare LP gas cylinder under or near this appliance.
B. Never ll the cylinder beyond 80 percent full
If the information in (A) and (B) are not followed exactly, a re causing death or
serious injury may occur.
DANGER
This appliance can produce Carbon Monoxide, an odorless and poisonous gas.
Never operate this appliance in a building or conned area where ventilation may
be restricted. Using it in an enclosed space can kill you.
DANGER
OPD Handwheel
(Cylinder Valve)
Safety Relief
Valve
Type1
Outlet
Protective Cap
7
Place dust cap on cylinder valve
outlet whenever the cylinder is not
in use. Only install the type of dust
cap on the cylinder valve outlet that
is provided with the cylinder valve.
Other types of caps or plugs may
result in leakage of propane.
CAUTION