Installation & Assembly

ManualsBrandsBayou Breeze ManualsGardenLacombe 4 ft x 4 ft Raised Garden Bed

L-shape

d Galvanized Raised Garden Bed

PREPARATION

SAFETY INFORMATION

Before assembling product, make sure all parts are present. Compare parts with

package contents list and hardware contents below. If any part is missing or damaged,

do not attempt to assemble the product.

Tighten all the screws before using.

This planter is intended for outdoor use only. The floor may be wet when watering

the plant.

Not for use by children. Keep children and pets away from the planter.

It’s suggested to wear gloves when assembling product.

Tools required for assembly (included):Allen key

Summary of content (4 pages)

PAGE 1
L-shaped Galvanized Raised Garden Bed PREPARATION Before assembling product, make sure all parts are present. Compare parts with package contents list and hardware contents below. If any part is missing or damaged, do not attempt to assemble the product. Tools required for assembly (included):Allen key SAFETY INFORMATION Tighten all the screws before using. This planter is intended for outdoor use only. The floor may be wet when watering the plant. Not for use by children.
PAGE 2
PACKAGE CONTENTS G A E F A B A A D C D Part Description Quantity A Frame A 5 B Frame B 1 C Shortest panel 2 D Short panel 2 E Long panel (with the top hole on the left of center) 1 F Long panel (with the top hole on the right of center) 1 G A C 2 reinforcement stick HARDWARE CONTENTS H I J Bolt Nut Allen key 50 PCS 50 PCS 1 PC
PAGE 3
ASSEMBCY INSTRUCTION 1 Align the holes on the Frame A with the holes on the shortest panel (C) and short panel (D). Attach the frame and panels with bolts (H) and nuts (I). Align the holes on another Frame A with the holes on the shortest panel (C) and long panel (E) Attach the frame and panels with bolts (H) and nuts (I). Hx16 E A Hardware Used: D C H A x16 Bolt I x16 Nut 2 Do the same way to the shortest panel (C), short panel (D) and long panel (F).
PAGE 4
3 Attach above two parts with Frame A, Frame B, bolts (H) and nuts (I). Hx8 A E B Ix8 Ix6 F Hx6 Hardware Used: H x14 I Bolt x14 Nut 4 Attach the reinforcement sticks (G) on the top of short panels (D) and long panels (E/F) with bolts (H) and nuts (I).