BWC885BGL Built-in wine cabinet
USER MANUAL FOR YOUR BAUMATIC BWC885BGL 41 Bottle built-in dual temperature electronic wine cabinet NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference, for you or any person not familiar with the operation of the appliance.
Contents Environmental note 4 Important safety information 5–7 Specifications of your wine cabinet Dimensions Product specifications Description of the appliance Control panel Description of the product features 7 –10 7 7-8 8 9 9 -10 Using your Baumatic wine cabinet Before switching on During first use Turning the appliance on and off Unlocking the control panel The interior light Setting the temperature Changing between Fahrenheit and Celsius Loading the wine cabinet Storing your wines Wine storage p
Environmental note Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance. o The packaging materials that Baumatic uses are environmentally friendly and can be recycled.
Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Advice Line. IMPORTANT: Any installation work must be carried out by a qualified electrician or competent person. Use of the appliance o Your appliance is only designed to be used in the home.
Child safety o Packaging material should be kept away from children. o This appliance is intended for use by persons with sufficient experience and knowledge of electrical appliances. Any other persons (including children) should be supervised or given instruction concerning use of the appliance by a person responsible for their safety. o Children should be supervised to ensure that they do not play with the appliance.
Service You should not attempt to repair the appliance yourself, as this could cause injury or a more serious malfunction. If you require a service call then please contact the Customer Care Department. Specifications of your wine cabinet Dimensions of appliance Height: Width: Depth: 885 mm 592 mm 555 mm Dimensions of aperture* Height: Width: Depth: o o o o o o o o o o o o o o o o o o o o 886 mm MIN 565 - 575 mm 560 mm MIN Gross capacity: 130 litres Net capacity: 127 litres Bottle capacity: 41 x 0.
IMPORTANT: When you install your appliance it is important to bear in mind its climatic rating. In order to find out the climatic rating of your appliance, you should check the rating plate. The rating plate is located on the front left edge of the appliance. The rating plate will indicate the ambient temperature range that your appliance will function correctly within. It is also advisable to make a note of the model number and the serial number of the appliance before installing it.
Control panel The control panel is located in the middle of the appliance. Description of the product features Control panel o The control panel is located in the middle of the appliance, behind the glass door. This means it is easy to set the temperature of the appliance and see what temperature the appliance is set to. Two cooling zones o There are two cooling zones inside of your wine cabinet. o Each cooling zone has a separate temperature control and temperature display.
o The deep shelves have telescopic rails which have stoppers of their own. Using your Baumatic wine cabinet Before switching on o Make sure that it has been installed by a suitably qualified person, as per the information contained in Baumatic’s installation instructions. o After delivery, wait for eight hours before connecting the appliance to your mains supply. This will allow any refrigerant gasses that may have been disturbed during the transportation process to settle.
During first use IMPORTANT: When you use the wine cabinet for the first time or restart the appliance after it has been turned off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED display. This is normal and it is due to the length of activation time. Once the wine cabinet has been running for a few hours everything will be back to normal.
The interior light o When the control panel is unlocked, you can use the light button to switch the interior light on and off. o The light will remain on unless it is turned off manually by pressing the light button. Setting the temperature o The temperature setting for the upper zone is adjustable within the range of 5°C - 12°C / 41°F - 54°F. o The temperature setting for the lower zone is adjustable within the range of 12°C - 22°C / 54°F - 72°F.
Loading the wine cabinet o IMPORTANT: Your appliance is ideally suited to store 0.75 litre Bordeaux style wine bottles. You must make sure that they do not prevent the door from shutting properly. o Always check that you can close the door without it fouling on a wine bottle, before shutting it. o When loading several bottles of wine at once, it will take longer for the appliance to cool the individual bottles.
o Wines kept at a higher temperature will age faster. Wine that is exposed to temperatures that are greater than 21°C (70°F) will suffer from poorer flavour and aroma. o If wine is kept at too low a temperature, this can result in the development of harmful deposits. A humidity of 70% is ideal for keeping corks from shrinking. o After a bottle of wine has been opened, the wine comes into contact with air.
Wine storage problems Corking- a tiny percentage of bottled wine (about 1%) will suffer from this. The cork reacts with the wine and gives it a musty, unpleasant taste. It is the most common wine storage problem and is caused by harmless bacteria growing on the cork. As unfortunate as this is, there is nothing to do but to discard all of the wine in the affected bottle. This is not to be confused with small fragments of cork floating in the wine itself, which will not impair the flavour.
Cleaning and maintenance WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO CLEAN IT. o Do not clean the appliance by pouring water onto it or spraying water over it. o The interior of the wine cabinet should be cleaned periodically, using a solution of bicarbonate of soda and lukewarm water. o Clean the accessories separately with soap and water. Do not clean them in a dishwasher. o Do not use abrasive products, detergents or soaps.
o You should be careful to make sure that wine bottles do not touch the rear wall of the appliance, as this can interrupt the automatic defrosting process and deflect water into the base of your wine cabinet. Moving your wine cabinet If you need to move your wine cabinet to another location you should follow the steps outlined below. o Remove all items from the wine cabinet. o Securely tape down all loose items such as the shelves inside of the appliance.
Installation IMPORTANT: Before installation and usage read all the instructions and make sure that the voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the same as the voltage and frequency in your home. The rating plate can be found on the front left edge of the inside of the wine cabinet.
o When the connection is completed, no stray strands or cut wire should be present. The cord clamp must be secured over the outer sheath. Positioning o It is advisable that your appliance is only installed in a location where the ambient temperature of the room, corresponds with the climate classification that is stated on the rating plate of your appliance. Your appliance may not function correctly if the ambient temperature falls outside of the following ranges.
Built-in installation o The dimensions shown in the diagram above will need to be followed. o The ventilation requirements shown in the diagram above must be followed. o To protect the glass door prior to installation the appliance is fitted with 4 white levelling feet which prevent the glass door touching the floor before it is installed. o The white levelling feet need to be replaced with the 2 black levelling feet provided before the appliance is installed.
o To secure the appliance to the kitchen cabinet, tighten the 2 screws on the mounting bar, which is fixed to the bottom of the unit, into the kitchen cabinet. o You can also install an additional top mounting bar, which is supplied with the appliance, onto the top of the appliance to secure it to the kitchen cabinet. Installing the handle o Remove the door gasket on the inside of the door to expose the two screw holes. o Install the handle using the screws and washers provided. o Replace the door gasket.
Reversing the door of your wine cabinet This appliance has the capability of the door opening from either the left or right hand side. o The instructions provided below are based on a wine cabinet with a right door hinge installed already. Any parts that you remove from the appliance whilst reversing the door, should be retained for later use. 1) Unscrew the 8 screws from the upper right hinge and bottom right hinge.
3) Rotate the door 180˚ (upside down). 4) Screw the 8 screws of the upper left hinge and bottom left hinge tightly to fix the door in place. IMPORTANT: Check that the door opens and shuts correctly, without fouling, after you have completed the door reversal process. After the door has been reversed, you should check the door seal of the wine cabinet. The seal should not be creased or crushed; otherwise there will be a gap between it and the inside of the door.
o The seal must adhere properly all the way around the door. o If the seal is not adhering to the cabinet properly, then you should either:a) Use a warm damp cloth and manipulate the seal until it does adhere to the cabinet properly, all the way around the door. or b) Use a hair dryer on its lowest heat setting and lightly heat the areas of the door seal that are not adhering correctly. The heat will make the seal more pliable and this will allow you to manipulate the seal into the correct position.
The lighting does not work. Too much vibration. The wine cabinet seems to make too much noise. The door will not close properly. “HH” or “LL” appear on the display and a continuous buzz noise can be heard. The door gasket does not seal properly. The appliance is not plugged in. The circuit breaker tripped or a fuse has blown. The light is turned off. Check to ensure the appliance is level. Check to ensure that no parts inside of the cabinet or in the compressor chamber are loose.
IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact the Customer Care Department on telephone number (0118) 933 6911. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. Please note that if an engineer is asked to attend whilst the product is under guarantee and finds that the problem is not the result of an appliance fault, then you may be liable for the cost of the call out charge.
Baumatic Consumables o BC001 Degreaser for Dishwashers (200g) o BC002 Descaler for Washing Machines and Dishwashers (200g) o BC003 Ceramic Hob Cleaner (250ml) o BC004 Oven Cleaner (250ml) o BC005 Stainless Steel Cleaner and Protector (250ml) o BC007 E-Cloth – General Purpose Cloth o BC008 Microwave Cover To order a Baumatic consumable product please call 0123 5437 244 and quote the product code. You can also order online from eshop.baumatic.co.
Technical Data Manufacturer Model Number Product Category Energy Efficiency Class (1) Annual Energy Consumption (2) Storage Volume of Fridge Compartment Storage Volume of Freezer Compartment Star Rating Coldest Storage Temperature Frost Free Compartments Temperature Rise Time Freezing Capacity Climate Class (3) Noise Level Installation Type BAUMATIC BWC885BGL 2 – Refrigeration-cellar, Cellar and wine storage appliances E 316 kWh 127 litres N/A N/A Upper Zone: 5°C / Lower Zone: 12°C N/A N/A N/A N 39 dB Buil
United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sales Fax (0118) 931 0035 Customer Care Telephone (0118) 933 6911 Customer Care Fax (0118) 986 9124 Spares Telephone (01235) 437244 Advice Line Telephone (0118) 933 6933 E-mail: sales@baumatic.co.uk customercare@baumatic.co.uk spares@baumatic.co.uk technical@baumatic.co.uk Website: www.baumatic.co.uk Facebook: www.facebook.com/baumatic.uk Czech Republic Baumatic CR s.r.