User Manual

CAUTION: DO NOT LOOK DIRECTLY AT THE SUN VIEWING THE
SUN OR ANY LIGHT SOURCE WITH THIS OPTICAL DEVICE CAN
CAUSE PERMANENT EYE DAMAGE.
Focusing
1. Look at an object through the spotter.
2. Focus on the object by turning the focusing dial clockwise or counter
clockwise until the image is sharp and clear (see ex. A)
3. Refocus when needed
Zoom
You can increase or decrease the magnification power of the spotting
scope by turning the zoom dial clockwise or counter clockwise. Focus
the tripod as needed
Eye Cup
The eye cup is designed for your comfort and to exclude extraneous
external light.
Mount
Your spotter DFS has bee equipped with a tripod and a handle. Screw
the handle or tripod onto the spotter’s tripod adapter. Turn the
tripod’s/handle dial clockwise. Make sure you tighten into place. You can
also screw the handle onto the spotter’s tripod adapter and then screw
the tripod on the handle. (see ex. B)
Care and Cleaning
1. Keep the lens covers on the lenses when the spotting scope is not
in use.
2. Store in a cool, dry place and unexposed to moisture.
3. When cleaning lens, wipe the lens with the original cleaning cloth or
optical tissue.
4. To remove any dirt or fingerprints add one or two drops of isopropyl
alcohol to the cloth and gently clean the surface of the lens.
5. Always handle scope with care and avoid dropping as they
may get damaged.
Eye Cup
Zoom
Dial
Tripod Adaptor
Focusing Dial
Objective
Lens
Tripod
Adaptor
Dial
BC328
© 2013 BARSKA
®
3/13BC295
SPOTTING SCOPES
LIMITED LIFETIME WARRANTY
BARSKA® Optics, as manufacturer, warrants this new precision optical
product to be free of original defects in materials and/or workmanship for
the length of time specified by this warranty. This warranty does not
include damage caused by abuse, improper handling, installation,
maintenance, normal wear-and-tear, unauthorized repairs or
modifications and tampering in anyway.
This warranty is limited to the original purchaser and is not transferable.
This warranty applies only to products purchased in the United States of
America and Canada.
In the event of a defect within 30 days, the consumer must return the
defective unit to the BARSKA dealer (the place of purchase) at his/her
own expense.
Beyond 30 days, BARSKA products should be sent to the following
address for warranty repairs. Products must be packed carefully and
sturdily to prevent damage in transit, and returned freight prepaid to:
BARSKA® OPTICS
Repair Department
855 Towne Center Drive
Pomona, CA 91767
For additional and updated information
please visit our website at www.barska.com
Please email [e-mail] or call 1-888-666-6769 for Return
Merchandise Number (RMA#) before any returns.
NOTE: All merchandise received without a valid RMA # will be returned
to shipper at his/her own expense.
Please include all of the following when returning BARSKA products for
service and/or replacement:
1. Please write your complete details (Name, Address, Telephone #,
E-mail address, RMA#, etc.)
2. Purchase receipt or Proof of Purchase. (Original/Copy)
3. A brief explanation of the defect.
4. A Check/Money Order of $25.00 to cover inspection, shipping and
handling.
*Please allow 6-8 weeks for delivery.
This product will either be replaced or repaired at the discretion of the
warrantor. If it's a discontinued item, we will replace the product with an
equivalent product. Should the repair not be covered by this warranty, an
estimate will be sent for your approval. Non-warranty repairs or
refurbishing of your optical products are always provided at a reasonable
cost.
BARSKA® Optics shall not be liable for any consequential, incidental
and/or contingent damages whatsoever. We will not pay shipping,
insurance or transportation charges from you to us, or any import fees,
duties and or taxes. This warranty supersedes all previous BARSKA®
Optics warranties.
DFS Spotting Scope Manual