Programming Manual

i480e&i480e-MD2 Programming Manual
107 / 139
respstatus
Values in the chapter 20.1.1
Note
N/A
20.21 AGRING
The AGRING command is used to send a ring alert to HF or HS.
Command
AT+B AGRING
Response
AT-B AGRING [status],
Parameters
status
Values in the chapter 20.1.1.
Note
N/A
20.22 AGCCWA
The AGCCWA command is used to tell the HF that an incoming call is waiting
while another call is ongoing, only for HFP.
Command
AT+B AGCCWA [type],[number]
Response
AT-B AGCCWA [status]
Parameters
type
Values 128-143: The phone number format may be a
national or international format, and may contain
prefix and/or escape digits. No changes on the
number presentation are required.
Values 144-159: The phone number format is an
international number, including the country code
prefix. If the plus sign ("+") is not included as part of
the number and shall be added by the AG as needed.
Values 160-175: National number. No prefix nor
escape digits included.
number
Phone number, a text string.
status
Values in the chapter 20.1.1.
Note
This command can only be sent after HF enables call waiting
notification and returns the AGCCWAIND indication.
Barrot Confidential