Programming Manual

i480e&i480e-MD2 Programming Manual
104 / 139
number
Phone number, a text string.
status
Values in the chapter 20.1.1
Note
N/A
20.17 AGSPKVOL
The AGSPKVOL command is used to set speaker volume on the HF or HS.
Command
AT+B AGSPKVOL [volume]
Response
AT-B AGSPKVOL [status]
Parameters
volume
The speaker volume, ranges from 0 to 15.
status
Values in the chapter 20.1.1.
Note
N/A
20.18 AGMICVOL
The AGMICVOL command is used to set microphone gain on the HF or HS.
Command
AT+B AGMICVOL [gain]
Response
AT-B AGMICVOL [status],
Parameters
gain
The microphone gain, ranges from 0 to 15.
status
Values in the chapter 20.1.1
Note
N/A
20.19 AGCNUM
The AGCNUM command is used to send subscriber number information to HF,
only for HFP.
Command
AT+B AGCNUM [type], [number], [service],[complete]
Response
AT-B AGCNUM [status]
Barrot Confidential