Installation manual

6-1
Power Connection
5975849 BARCOREALITY 812 HS 060599
6
POWER / MAINS COMM. PORT PORT 3
PORT 4/5 PO RT 2
PORT 1 PROJECTOR MODE
PORT 4/5
PORT 3 COMM. PORT
PORT 2
PORT 1PROJECTOR MODE POWER / MAINS
P O W E R / M A I N S
POWER CONNECTION
Power (mains) cord connection
Use the supplied power cord to connect your projector to
the wall outlet. Plug the female power connector into the
male connector at the front of the projector.
Preparing your power cord
Mains lead (power cord) with CEE7 plug
As the colors of the wires in the mains lead of this apparatus may
not correspond with the colored markings identifying the terminals in
your plug, proceed as follows:
 The yellow/green wire is ground and must be connected to the
terminal in the plug which is marked by the letter E or by the safety
earth symbol or colored yellow and green.
 The blue wire is neutral and must be connected to the terminal
marked with the letter N or colored black.
 The brown wire is the line and must be connected to the terminal
marked with the letter L or colored red.
The wires of the delivered mains lead (power cord) are colored in
accordance with the following code :
Yellow and Green : Ground (Earth).
Blue : Neutral.
Brown : Live.
Power cord with an ANSI 73.11 plug
The wires of the delivered mains lead (power cord) are colored in
accordance with the following code :
Yellow and Green : Ground (Earth).
White : Neutral.
Black : Live.