User's Manual

Page 33 of 37
Quantity: Enter the quantity to be dispensed through the Hose.
• Quantity may be from 0.0-99.9 and 100-999.
• There may be only one digit after the decimal point.
• Dispensed quantities from 100-999 will be in count down mode.
• A quantity of 0.0 will put the RF Meter in a free-dispense mode, the
RF Meter will not latch and the user may display fluid as long as the
trigger is manually held in the open position. The user must press
RESET on the RF Meter to exit this dispense and communicate the
dispense order to the Keypad.
Enter Quantity
----
Active keys:
Numeric keys,
,
,
Action:
Select the quantity to be dispensed and press Enter
Dispense Confirmation: Press Enter to confirm a dispense is desired.
Press enter for
Dispense
Active keys:
,
Action:
Press the Enter Key to confirm the dispense. Press HOME to cancel order and return to the
main screen.