Tus neeg siv phau ntawv

EN-04
Step1:LocateYourFuseBox
Consultyourcarowner'smanualforthelocationofthefusebox.Dependingon
themodelofyourvehicle,youmayneedtoremovesometrimoropensome
panelstogainaccesstothefuses.
INSTALLATION
Step2:
Connectthe oftheHard-wireKitwithonetypeofFuseTapsthatRedWire
yourvehiclerequires.
EN-05
Step3:
LocatetheFuseBoxandfindaConstantFuseSlotinit.(ConstantFuseSlot
alwayshaspowerevenwhentheignitionisoff.)
Useacircuittestertotestwhichfuseisconstantandwhichisignition-switched.
Thecircuittesterwilllightupwhenpokingintotheportontopoftheconstant
fuse,viceversafortheignition-switchedfuse.
ConstantFuseSlot
Step4:
RemovetheoriginalFuseintheConstantFuseSlotandinstallitintotheBottom
SlotsoftheFuseTap.