Instructions / Assembly

Warning

Let your heater cool before you put your cover on.

Installation: Check your heater to make sure there are no

sharp objects or corners that could stress your cover as you pull

it on.

Completely unzip your cover all the way from the top to the

bottom and around the top. Using a stepladder, if needed,

carefully slip your cover over the top of the heater and zip it

closed around the top. Now zip your cover closed up from the

heater base. Close the zipper together at the bottom of your

cover. Then zip your cover up to the top of your heater.

Cleaning Clean your cover with a soft brush and luke-

warm water. DO NOT USE SOAP as it may remove the

protective coatings added by the factory. Air dry. One Year

Warranty This cover is factory warranted for workmanship and

materials for one year after purchase.

One Year Warranty This cover is factory warranted for

workmanship and materials for one year after purchase.

PAGE 1
Warning Let your heater cool before you put your cover on. Installation: Check your heater to make sure there are no sharp objects or corners that could stress your cover as you pull it on. Completely unzip your cover all the way from the top to the bottom and around the top. Using a stepladder, if needed, carefully slip your cover over the top of the heater and zip it closed around the top. Now zip your cover closed up from the heater base. Close the zipper together at the bottom of your cover.