TDC Power Derby DMX LED light effect User manual
Safety instructions WARNING! Always keep this device away from moisture and rain! Hazardous electrical shocks may occur! WARNING! Only connect this device to a matching power outlet. This device is intended to work on a specified AC currency. Connecting this device to power outlets with other voltages may result in permanent damage and possible hazardous situations, such as fire or electrical shocks! WARNING! Be careful with every operation of this device.
- Only handle the power cord by its connectors. Never pull the cable to remove a connector from its socket, as this could lead to damage and electrical shocks. - Always operate this device with a stable AC current. - Always operate this device with the AC ground wire connected to the electrical system's ground. - Never use other types of cables than specified in the manual, do not use defective or bad functioning cables.
Box contents Box contents 1x TDC Power Derby fixture 1x power cable Unit and accessory inspection - Always use the supplied power cable to connect the unit to a power supply. If the cable appears broken or has visible damage, do not use it. - If the unit is not going to be used for a longer period of time, disconnect it from the power supply and store it in a dust-free environment. - Always check the unit for possible damage before use.
Device overview 2 1 2 7 3 4 5 1. Beam output 2. Adjustable bracket 3. Built-in microphone 4. DMX input (3P XLR) 5. DMX output (3P XLR) 6. Menu display with buttons 7. Safety eye 8. IEC output (Power link) 9.
Setting up the unit To activate the unit, connect the included power supply to the unit and a suitable 230V, 50 Hz power outlet. The fixture will start up and show the last chosen setting on the display. Usually, with a new product, this is the DMX mode with the value set on 001. The display shows several settings, each with the possibility to set several values. Use the display and the menu buttons to set preferences, change settings and scroll through the menu.
Hour: The fixture shows how much hours it has been active. This is very practical for rental companies which need to perform service intervals on all fixtures after several hours of performing, to maintain optimal shape. UERS: Displays the software version which is installed on the main PCB. The TDC Power Derby is equipped with several working modes, each with its own advantages.
CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 Color Color Color Color Color Color Color Motor 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-009 010-120 121-134 135-245 The first green dimmer The first blue dimmer The first white dimmer The second red dimmer The second green dimmer The second blue dimmer The second white dimmer Motor Stop Motor turn left, speed from fast to slow Motor stop Motor turn right, speed from slow to fast Motor stop 246-255
Technical specifications - Powerful LED derby effect High output thanks to 2x 10W RGBW LED chip Dozens of narrow, colourful and moving beams fill the room with light Razorsharp optics for intense beam projections Individual LED chip control with colour mixing, for creative colour combinations.
