Product Overview
94
800.292.2737 | sales@aymcdonald.com | aymcdonald.com
Accessories
Accessories
4-19
METER NUTS
METER PLUGS
GASKETS FOR SWIVELS
Accessories
Meter Nuts are used to connect straight and/or offset swivel gas ttings to the gas meter. Manufactured per ANSI B109.1.
Model Size
I.D. DIM.
In Inches
O.D. DIM.
In Inches Thickness
Carton
PCS/WT
4820-197 5LT
.72 .94 .109 100/.10
4820-184 10LT
.968 1.251 .109 100/.30
4820-185 Sprague #1A
and O Emco
.968 1.406 .109 100/.40
4820-186 20LT
1.290 1.625 .109 100/.40
4820-187 30LT
1.468 1.875 .109 50/.25
Model Size
I.D. DIM.
In Inches
O.D. DIM.
In Inches Thickness
Carton
PCS/WT
4820-188 45LT
1.672 2.094 .109 50/.30
4820-193 2A
1.118 1.718 .109 50/.40
4820-190 3A / 4A
1.47 2.13 .109 50/.40
4820-191 5A
2.295 3.232 .109 50/.40
4820-192 60LT
1.88 2.29 .109 50/.30
Meter Plugs are used to prevent the unintentional ow
of gas from meter sets without meters attached. They
also prevent insects and other foreign material from
entering the gas piping. They are available as shown,
or can be supplied with 1/8” or 1/4” pipe taps in the
center of the hex, with or without standard pipe plugs.
Gaskets are used to seal malleable iron offset or straight ttings on the face of the gas meter when tightening the swivel nut on meter
thread or meter nut plug. These rubber gaskets made of Buna-N or neoprene are resistant to the action of natural and manufactured
gases. The inside diameter is intended to lightly grip the pilot O.D. of the tting to minimize problems during assembly of the swivel nut
to the meter.
METER ADAPTERS - ZINC
The McDonald Meter Adapters are used to efciently convert
from one meter size to another. Each adapter comes with a
at gasket seal on the female end. In addition, each tting
is zinc plated for corrosion protection. The zinc is applied
after machining so the threads are also protected.
If you are converting meter sizes in your system, consider
these ttings for a cost effective approach. Manufactured
per ANSI B109.1.
Black
Part #
Galvanized
Part # Size
Threads
Per Inch
I.D. DIM.
In Inches
Carton
PCS/WT
4815-671 4815-673 5LT 12
0.880” 100/13
4815-501 4815-517 10LT 11 1/2
1.16” 100/18
4815-507 4815-523 20LT 11 1/2
1.42” 100/22
4815-543 4815-557 30LT 11 1/2
1.69” 100/30
4815-513 4815-529 1A 12
1.34” 100/24
4815-564 4815-574 O EMCO 11 1/2
1.34” 100/24
Black
Part #
Galvanized
Part # Size
Threads
Per Inch
I.D. DIM.
In Inches
Carton
PCS/WT
4815-566 4815-576 45LT 11 1/2
1.94 100/42
4815-624 4815-626 3A/4A 11 1/2
2.02 50/37
4815-830 4815-832 60LT 11 1/2
1.94 50/24
4815-806 NA 5A 8
2.97 20/36
4815-700 NA 100LT 11
2.438 20/26
Not
Tapped
1/8”
Part #
1/4”
Part # Size
Threads
Per Inch
Carton
PCS/WT
4820-181 4820-000 4820-195 10LT 11 1/2
100/21
4820-180 4820-002 #1A 12
100/26
4820-182 4820-001 4820-196 20LT 11 1/2
100/30
4815-663 4815-750 4820-014 30LT 11 1/2
100/41
4815-665 4815-769 45LT 11 1/2
100/48
Model
Male Meter Thread
(converting from)
Female Meter Thread
(converting to)
Carton
PCS/WT
4820-007 10LT
20LT 50/30
4820-008 1A
10LT 50/18
4820-013 10LT
1A 50/17